Molecular Devices SkanWasher 300, Руководство пользователя

Страница: 29 / 78

Software Configuration
SkanWasher 300 User Guide 20
When Sensor is enabled, the following parameters must be valid to start a
wash:
‹
Air pressure must be close to the selected value.
‹
A microplate must be on the microplate holder.
‹
The waste reservoir must not be full.
‹
The waste vacuum must be less than 0.9 bar.
.
Read Sensor
Instrument parameters can be verified using this Edit Option. Five sensor val-
ues are displayed for read only purposes. No changes can be made from this
screen. The five sensor values are from the following readings:
!! IMPORTANT: When sensors
disabled, all four safety features will
be disengaged.
Air Pressure Value is actual air pressure on internal pressure source
displayed in bar. Changes can be made through software
program. This sensor can be disabled through Edit
Options/Sensor On/Off.
Vacuum Value is vacuum pressure from vacuum port, displayed
in mbar. No changes can be made through software pro-
gram.
µP Shows the status of the microplate lift 0-position sensor.
Displays in (+) or (-). This sensor can be disabled
through Edit Options/Sensor On/Off.
PL Shows the status of the plate lift 0-position sensor. Dis-
plays in (+) or (-).
WF Shows the status of the waste level sensor. Displays in
(+) or (-). This sensor can be disabled through Edit
Options/Sensor On/Off.