Molecular Devices QPix 420, Руководство пользователя

Страница: 164 / 225

QPix 420 Colony Picking System User Guide
164 5031496 G
Arranging the Plate Layout
To arrange the plate layout:
1. Open the instrument door.
2. In the Holder Layout Summary window, follow the instructions to correctly arrange the plate
holders in the instrument. The layout is defined by the selections you made in earlier steps.
3. Select the Checked? check box to confirm the plate holder layout.
4. When you are finished making all of your changes, click Next.
CAUTION! At this point, you cannot go back and change settings. To make changes
now, you must cancel the process and start again.
5. Remove all plate lids.
6. In the Load Plates window, follow the instructions to correctly place the destination plates.
7. Click Next.
8. When the Please Load Source window displays, load the source receptacles in the correct
locations on the instrument deck.
Tip: If needed, the filter must be installed between the lightbed and the source tray
before continuing.
9. Close the instrument door.
10. Click Next to take a white light test image of the source receptacles.