Molecular Devices MultiWash+, Руководство пользователя

Страница: 25 / 152

5032022 C 25
Chapter 3: Running a Procedure
Before running procedures with the Mu Microplate Washer, select the instrument
set up options, define the microplate types, define the wash or rinse cycles, and then define
the procedures.
To select the instrument set up options, see Selecting Instrument Set Up Options on
page 113 .
To define the microplate types, see Defining a Microplate Type on page 77 .
To define the wash or rinse cycles, see Defining a Wash or Rinse Cycle on page 65 .
To define the procedures, see Defining a Procedure on page 51 .
After you have one or more procedures defined, scroll the LCD display to Run Procedure .
From Run Procedure , select a previously defined wash or rinse procedure from the list.
Figure 3-1: The Run Procedure menu option
Button Action
On the left
Press this button to scroll to Service . The Service menu is intended to be used by
Molecular Devices trained personnel only.
On the right
Press this button to scroll to Prime/Rinse . See Priming or Rinsing the Fluidics System
on page 31 .
Press this button to scroll forward through the list of defined procedures.
Press this button to scroll backward through the list of defined procedures.
Press this button to run the selected procedure. See Running the Selected
Procedure on page 26 .
Table 3-1: Actions of Control Panel Buttons
3