Molecular Devices MultiWash+, Руководство пользователя

Страница: 51 / 152

5032022 C 51
Chapter 5: Defining a Procedure
Before running procedures with the Mu Microplate Washer, select the instrument
set up options, define the microplate types, define the wash or rinse cycles, and then define
the procedures.
To select the instrument set up options, see Selecting Instrument Set Up Options on
page 113 .
To define the microplate types, see Defining a Microplate Type on page 77 .
To define the wash or rinse cycles, see Defining a Wash or Rinse Cycle on page 65 .
To edit or define a procedure, scroll the LCD display to Define Procedure . From Define
Procedure , define and save procedures using defined cycles and defined microplate types.
Tip: If you have a previously defined procedure, you can create a similar new
procedure by editing an existing procedure and giving it a new name.
Figure 5-1: The Define Procedure menu option
Button Action
On the left
Press this button to scroll to Prime/Rinse . See Priming or Rinsing the Fluidics System
on page 31 .
On the right
Press this button to scroll to Define Cycle . See Defining a Wash or Rinse Cycle on page
65 .
Press this button to scroll forward through the list of previously defined procedures.
If you want to edit a previously defined procedure, scroll until the name is displayed.
If you want to define a new procedure, scroll until
<new> is displayed.
Press this button to scroll backward through the list of previously defined procedures.
If you want to edit a previously defined procedure, scroll until the name is displayed.
If you want to define a new procedure, scroll until
<new> is displayed.
Press this button to start defining the procedure. See Defining the Procedure on page
52 .
Table 5-1: Actions of Control Panel Buttons
5