Mocon AMETEK Dansensor Lippke VC1400, Руководство пользователя

Страница: 43 / 104

Dansensor
®
Lippke VC1400 EN User Guide 41
P/N 390262-B
02/2022
Get started
When you start the device for the first time and before you start making measurements, it is
recommended that you perform some basic device settings.
NOTE! To be able to change device settings you must change the device to
“Administrator” access level.

To do so select “Access” from the “Main Menu” - see "Access" on page 64 for details.

Device Settings

Go through the parameters available in the Settings menu and make appropriate
settings - see "Settings" on page 82 for details.

Set up Users

From the factory no default users have been created, but we highly recommend that you
create specific users, so that you can separate measurements performed by different users
later on for use in statistics etc. - see
"Access" on page 64 and "Login" on page 87 for details.

Set up Test Definitions and Workflows

From the factory no default Test Definitions have been created, but we highly recommend
that you create specific Test Definitions, so that you can separate the different tests later on
for use in statistics etc. - see
"Workflow" on page 56 for details.