Mocom Tethys H10, Руководство оператора, Страница: 66 / 86

66 OPERATOR'S MANUAL EN
SCHEDULED
MAINTENANCE
MESSAGES
The thermo-disinfector periodically displays warning messages relevant to 'routine'
maintenance operations that must be carried out in order to ensure the proper operation of
the device.
Press DONE to confirm that the envisaged maintenance operation has been
performed.
Press REMIND to postpone the operation.
In this case, the warning message will reappear the next time the thermo-disinfector is used.
WARNING MESSAGE
HEPA FILTER CLEANING
DRAINAGE FILTER CLEANING
GENERAL SERVICE
NOTE
TO ACHIEVE THE BEST PERFORMANCE OF THE DEVICE, REGULAR
MAINTENANCE MUST BE CARRIED OUT ON A REGULAR BASIS.
PERIODICALLY A MESSAGE WILL BE DISPLAYED REQUESTING THAT
THE ABOVE MAINTENANCE CHECKS BE PERFORMED.
FOR FURTHER INFORMATION OR IN CASE OF DOUBT, CONTACT THE
TECHNICAL SERVICE: IF THEY HAVE PERFORMED REGULAR
MAINTENANCE ON THE DEVICE, THE TECHNICIAN MIGHT HAVE
ALREADY CARRIED OUT SOME OF THESE OPERATIONS.
- Do not wash the thermo-disinfector with direct jets of water, neither under pressure nor
sprinkled. Seepage into electrical and electronic components could damage the
functioning of the device or its internal parts, even irreparably;
- Do not use abrasive cloths, metal brushes (or other aggressive materials) or products for
metal cleaning, both solid and liquid, other than the recommended ones to clean the
device or the washing chamber;
- Do not use unsuitable chemicals or inadequate disinfectants to clean plastic components
and the washing chamber. In fact, these products can damage the washing chamber,
even irreparably;
- Do not allow limescale or residues of other substances to accumulate in the washing
chamber, on the door and on the gasket, but remove them periodically. Such residues
may damage these parts, besides compromising the operation of the hydraulic circuit
components.
To remove any limescale deposit, run the DECALCIFICATION CYCLE by thoroughly
following the relevant indications.
HAZARD
BEFORE PERFORMING ORDINARY MAINTENANCE, MAKE SURE THAT
THE POWER SUPPLY CORD IS REMOVED FROM THE MAINS SOCKET.