Mocom Tethys H10 Скачать руководство пользователя страница 33

Страница: 33 / 86

OPERATOR'S MANUAL

DECALCIFICATION CYCLE

A white thin layer could deposit on cover and chamber metal surfaces due to a high setting of

water hardness value.

Machine can be cleaned running the special "Decalcification" cycle.

When carrying out this cycle, use a special limescale remover for water fittings, to be filled in

manually. Use only limescale removers for water fittings based with Sulphamic Acid and/or

Citric Acid and/or Phosphoric Acid.

WARNING

AVOID USING TOILET PRODUCTS CONTAINING HYDROCHLORIC ACID

OR NITRIC ACID OR SULPHURIC ACID AS THEY COULD DAMAGE THE

DEVICE.

Start the cycle without pouring product inside chamber. Wait for the next message and pour

product in.

When requested, pour 50 ml of product inside chamber and close cover.

NOTE

BEFORE PRESSING "YES", MAKE SURE THAT PRODUCT HAS BEEN

POURED INSIDE CHAMBER AND THAT COVER HAS BEEN CLOSED.

Содержание Tethys H10























































































Результаты поиска

Содержание Tethys H10

Отзывы:

Mocom Tethys H10, Руководство оператора, Страница: 33 / 86

Результаты поиска

Содержание Tethys H10

Отзывы: