80
CODE
POSSIBLE CAUSE
PROPOSED SOLUTION
E031
Water level in the drain tank over the max level
do a
RESET
following the instructions and empty the tank.
Completely drain the drain tank.
max water level sensor failure.
Contact Technical Service
(
see Appendix
).
E040
No water in external container (automatic filling)
do a
RESET
following the instructions.
Fill the container with a sufficient amount of water (
re-
member to periodically check the level
).
Automatic filling system
not
properly installed.
do a
Reset
following the instructions.
Check that the filling tube is properly connected.
Remove any obstruction along the tube path.
Automatic filling system failure.
Contact Technical Service
(
see Appendix
).
E041
Automatic filling system
not
properly installed.
do a
RESET
following the instructions.
Check that the filling tube is properly connected (see the
section
Installation
).
Remove any obstruction along the tube path.
Automatic filling system failure.
Contact Technical Service
(
see Appendix
)
.
problem in the hydraulic circuit.
E260
Drain filter obstructed.
Clean the drain filter (see the
Appendix
"
MAINTENAN-
CE"
).
problem in the hydraulic circuit.
Contact Technical Service (
see
Appendix
).
E261
Bacteriological filter obstructed.
Clean the drain filter (see the
Appendix
"
MAINTENAN-
CE"
).
problem in the hydraulic circuit
Contact Technical Service (
see
Appendix
).
E900
air seepage through the gasket
do a
Reset
following the instructions.
Thoroughly clean the gasket with a clean cotton cloth moiste-
ned with water.
Restart the program.
problem in the hydraulic circuit.
Contact Technical Service
(
see Appendix
)
.
E901
Excessive humidity in the sterilization chamber.
do a
RESET
following the instructions.
Thoroughly dry the inside of the chamber and restart the
program.
air seepage through the gasket
do a
RESET
following the instructions.
Thoroughly clean the gasket with a clean cotton cloth moi-
stened with water.
Restart the program.
problem in the hydraulic circuit.
Contact Technical Service
(
see Appendix
).