manualshive.com logo in svg

Mocom B Classic-28, Руководство по эксплуатации, Страница: 51 / 97

Поделиться
Скачать
Mocom B Classic-28 Скачать руководство пользователя страница 51

46

OK

Print labels

No. of labels

 Expiry (days)

10

20

   Print labels

No. of labels

 Expiry (days)

10

20

OK

Print labels

No. of labels

Expiry (days)

10

20

Select the field to be set using the arrows (number of labels to be printed at the end of the cycle 

and material expiry) and  confirm with OK.

act on the + and – buttons to change the value. 

Confirm with OK and continue with modifying the other fields.

press the exIT button to save all the settings and go back to the previous page.

If the printer is connected to the autoclave with the RepoRT option set, the sterilizer will automa-

tically print the summary report at the end of the cycle.

Selecting the pRInT laST CyCleoption with the RepoRT option set, the summary report of the 

last cycle is printed, otherwise you go back to the papeR SeTTInG page.

Set the RepoRT option and carry out the above described operations again.

Selecting the pRInT TeChnICal RepoRT option, the technical report is printed (only if the 

RepoRT option is set).

OK

Paper setting

  Print technical report

Print last cycle

134°C Univ.

0’

60°C

1.12 Bar

Completed

00:00

at the end of the cycle, when tapping the button indicated, the 

following page is displayed only if the printer is connected to the 

sterilizer and set for label printing (settable from print manage-

ment).

If not, the sterilizer automatically prints the report.

Содержание B Classic-28


































































































Отзывы:

Нет отзывов