manualshive.com logo in svg

Mobotix S15, Руководство пользователя

Поделиться
Скачать
Mobotix S15 Скачать руководство пользователя страница 97

97

/160

Installing the S15M FlexMount

© MOBOTIX AG  •  Security-Vision-Systems  •  Made in Germany

www.mobotix.com  •  [email protected]

Attachment to a Rear Wall

If the S15M is attached with the base plate on a rear wall (and then, for example, to a separate 
stainless steel cover), the camera can be mounted in just a few steps:

1.  If necessary, mark the drill holes at the intended mounting position, 

drill the holes for the base plate and hammer in the 

6 mm dowels

 

supplied.

2.  If this has not been done already, insert the cable tie needed to 

ensure that less strain is placed on the connection cable into the slot 
provided below in the base plate without closing it. 

3.  Screw on the S15M with the 

4×40 mm screws

 included (or other suitable screws) 

and 

washers (with a diam. of 4.3 mm)

.

4.  Mark the hole for the camera lens in the cover using the drilling template for the 

S15M and drill a hole there with a 35 mm/1.38 in diameter. 

5.  Place the cover over the camera and the cables.

Attachment Behind Screens, Walls or Ceiling Elements

This type of mounting can be completed using various attachment elements.

•  Bonded nuts with stud bolts, nuts and washers as shown in the illustration. 
•  Thicker materials (greater than 6.4 mm/0.25 in) need to be machined accordingly 

in order to accommodate the camera housing. They can then be attached using 
anchor nuts or screw sockets as well as stud bolts, nuts and washers or similar.

Make sure that there is enough space behind the mounting surface for the camera and 
that the pressure equalization of the camera is also free after mounting.

1.  Mark the hole for the camera lens in the cover using the drilling template for the 

S15M and drill a hole there with a 35 mm/1.38 in diameter. 

2.  Mark the places on the mounting surface where the nuts are to be placed with the 

help of the drilling template.

3.  Tighten the stud bolts, nuts and washers. 
4.  Place the camera from behind onto the prepared attachment elements and screw 

the camera on tightly (secure nuts with a screw locking device to prevent them from 
becoming loose).

MOBOTIX offers a 

mounting kit (acces-

sories) for this type 

of attachment

Содержание S15

































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды