manualshive.com logo in svg

Mobotix S15, Руководство пользователя

Поделиться
Скачать
Mobotix S15 Скачать руководство пользователя страница 94

94

/160

S15 Camera Manual: Installation

© MOBOTIX AG  •  Security-Vision-Systems  •  Made in Germany

www.mobotix.com  •  [email protected]

5.  If a 15° wedge is used, the visible wedge and the wedge 

sealing must now be pushed onto the cable, the sensor 
module and any extensions already mounted (the thicker 
side of the wedge is at the top). Make sure that the 

MOBOTIX

 lettering at the front of the sensor module is 

pointing upwards!

6.  Now insert the cable and then push the whole sensor module (including wedge, 

wedge sealing and extension, if installed) through the hole.

7.  If a 15° wedge has been fitted, the second wedge sealing 

and the second wedge must now be pushed over the 
sensor cable, any installed extensions and the sensor 
module (the thicker side of the wedge is at the bottom) 
may need to be shifted to ensure that the nut is properly 
positioned on the back.

8.  Feed the sensor cable through the nut and secure the 

sensor module and mounted extensions using that nut. 
If you need to seal off the sensor module against the 
wall, you should apply silicone sealant before tighten-
ing the nut.

9.  Attach the sensor cable of the first sensor module to the 

Cam1

 connector and the 

sensor cable of the second sensor module to the 

Cam2

 connector of the S15D (pull 

the blue triple cable retainer up, remove the plug, insert the sensor cable and push 
the cable retainer down again).

2.3.3  Plugging in and Removing Extensions

The extensions are fixed onto the sensor modules (or other extensions) with the help of 
a bayonet catch.

Attaching Extensions

1.  Turn the sensor module so that the larger lobe (red 

arrow on the illustration) is at the front. The other three 
lobes are smaller and do not protrude (blue arrows).

MOBOTIX

MOBOTIX

Make sure MOBOTIX 

lettering is pointing 

upwards!

If you install a S15D 

with automatic day/night 

switching, make sure to 

connect the D11 (day) 

sensor module on the 

Cam1 and the N11 (night) 

sensor module on Cam2

Содержание S15

































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды