17
/160
S15 FlexMount
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
World’s first Dual Thermal Camera
The new thermal sensor modules measure the thermal radiation of objects, delivering
clear thermal images even in absolute darkness. Together with the MxActivitySensor, they
can reliably detect motion in images at night – where only changes in position will trigger
a signal. Objects moving on the spot do not trigger a signal. The thermal sensor modules
also have an advantage during the day, as they can detect moving objects in shadows,
semi-darkness, smoke or behind bushes.
MxActivitySensor
The S15 provides an activity-controlled image analysis sensor as standard for detecting the
movements of people and objects in a defined surveillance area (full image or section).
The MxActivitySensor delivers reliable results particularly in outdoor area applications, in
contrast to video motion detection that continues to be available and that registers all
image changes in defined video motion windows. In the monitored area, the camera
distinguishes between the continuous movements of vehicles, persons or objects that
trigger an alarm and movements that do not set off an alarm such as shadows, changing
light conditions and trees swaying in the wind.
MOBOTIX Mounts – Flexible Installation Options
Whether in ceilings, behind faceplates or built into other devices, the MOBOTIX mounts
provide flexible solutions for every application scenario. The HaloMount installs sensor
modules into ceilings as easily as halogen spot lamps, the SpeakerMount with integrated
speaker provides the audio output. If two sensor modules are to be installed side-by-side
with the same viewing direction, you can use the DualMount (e.g. for Day/Night sensor
modules). Two sensor modules looking into opposite directions? This is calling for the
SurroundMount (e.g. for long hallways). The AudioMount, complete with installed S15M
is glued to the back of a faceplate in order to provide door station functionality. The
BlockFlexMount sensor modules allow installing the S15D with up to two sensor modules
into any device.
Low Power Consumption in Accordance with the PoE Standard (IEEE 802.3af)
An S15 uses no more power than its predecessor (typically 4.5 watts), despite the new
sensor technology. Adjusting the PoE class via the camera software also enables the use
of PoE switches that cannot be operated on all ports with PoE class 3 (up to max. 12.95 V).
If an S15D is used with one or two thermal sensor modules, PoE Class 3 is required.
