manualshive.com logo in svg

Mobotix S15, Руководство пользователя

Поделиться
Скачать
Mobotix S15 Скачать руководство пользователя страница 88

88

/160

S15 Camera Manual: Installation

© MOBOTIX AG  •  Security-Vision-Systems  •  Made in Germany

www.mobotix.com  •  [email protected]

2.2.4  Network Connection with Installation Cable

As an alternative to connection to an MX-Patch-Box, MX-NPA-
Box or standard network port, you can also connect the S15 
directly to an 

installation cable

. Since the housing cover of 

the camera must be opened for this purpose, this working 
step 

in a S15M must be carried out before

 mounting the 

camera as the housing cover is no longer accessible once it has been mounted.

The installation cable is fixed onto the circuit board before fitting the wires onto the LSA 
cutting clamps using one of the cable ties supplied (M.9) to ensure less strain is placed 
on the cable and that the camera is earthed correctly.

Connecting Peripheral Devices (MxBus, Microphone, Speaker)

The opening provided for the MOBOTIX patch cable must be 
used for all other cables that are connected to the camera 
when using an installation cable. The blue bayonet catch 
and the blue sealing plug in the left-hand connector must 
be removed for this purpose. The single wire plug or one of 
the other cable plugs (M.4/5) is then pushed into the opening, depending on the cable 
used. The bayonet catch will no longer be used.

The cable used must be fixed to the 

base plate

 using one of the cable ties supplied (M.9) 

to ensure that less strain is placed on the cable. The individual cable wires must be fixed 
on the screw clamps using the the screwdriver supplied (M.9).

2.2.5  Using Sensor Modules (S15D Only)

One or two sensor modules can be connected via both right-
hand connectors in the S15D. For this purpose, the lock is 
pulled forward, the central and right-hand (or only the central 
plug if only one sensor module is used) is removed and the 
corresponding sensor cable is inserted. The connectors are 
waterproof again once the lock is pressed down.

2.2.6  Using the MiniUSB Cable

Existing add-on modules such as the MOBOTIX ExtIO (USB) or 
external USB hard drives can be connected via the MiniUSB 
connector. For this purpose, the lock is pulled forward, the 
left-hand plug is removed and the MiniUSB cable is inserted. 
The connectors are waterproof again once the lock is pressed 
down.

Installation cable

Further cables

Sensor cable  

for sensor modules

MiniUSB cable

Содержание S15

































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды