manualshive.com logo in svg

Mobotix S15, Руководство пользователя

Поделиться
Скачать
Mobotix S15 Скачать руководство пользователя страница 86

86

/160

S15 Camera Manual: Installation

© MOBOTIX AG  •  Security-Vision-Systems  •  Made in Germany

www.mobotix.com  •  [email protected]

Inserting and Locking MOBOTIX Cables and Plugs

The corresponding lock must be applied or closed again after inserting one of the cables 
or plugs indicated above into the S15:

Patch Cable

MiniUSB Sensor Cable

1.  Insert the cable/plug.
2.  Attach bayonet catch.
3.  Turn the bayonet catch to the right.

1.  Insert the cable/plug.
2.  Push the triple retainer down 

(towards the base plate) until it 
clicks into place.

2.2.2  Notes on Cable Lengths and Power Supply

•  Power is supplied to the camera via the camera Ethernet connection (patch or instal-

lation cable). We recommend using a MOBOTIX PoE adapter or another similar 
high-quality PoE product to loop-in the power supply:

– 

One camera:

 with the PoE adapter (MX-NPA-PoE or MX-NPA-Box)

– 

Multiple cameras:

 with PoE products conforming to IEEE 802.3af (PoE switch)

•  The 

maximum length

 of the network cable for power supply over an Ethernet cable 

is 

100 m/110 yd

.

•  Make sure that you only use switches or routers that support the 

10/100  Mbps 

network interface

 of the camera.

•  We highly recommend using uninterruptible power supplies (UPS) to provide backup 

power.

•  If you are using IEEE 802.3af or IEEE 802.3at (PoE+) Power-over-Ethernet network 

components to supply power to MOBOTIX cameras, make sure, if possible, that 
these components do not have a fan. Since the power consumption of MOBOTIX 
cameras is very low compared to other products, the reliability of the entire system 
is increased, thus extending the life of these components.

Содержание S15

































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды