manualshive.com logo in svg

Mobotix S15, Руководство пользователя

Поделиться
Скачать
Mobotix S15 Скачать руководство пользователя страница 87

87

/160

Before Mounting

© MOBOTIX AG  •  Security-Vision-Systems  •  Made in Germany

www.mobotix.com  •  [email protected]

Caution

If the camera’s power supply has been set to PoE Class 3

, you can attach modules 

to the MxBus 

and

 USB connectors that do not exceed a total power consumption of 

4 W. If the camera is using 

PoE Class 2

, 

the total power consumption of all attached 

modules must not exceed 1 W!

For more information on changing the PoE class, please see 

Section 2.5.7, «Variable 

PoE»).

2.2.3  Network Connection with MOBOTIX Patch Cable

The supplied 

MOBOTIX patch cable

 can be used to connect the camera to an 

MX-Patch-

Box

, an 

MX-NPA-Box

 or to a standard network port.

Connecting the Patch Cable to the Camera

First remove the blue bayonet catch and the blue sealing 
plug in the left-hand connector on the S15. Then insert the 
MOBOTIX patch cable into the camera and secure the cable 
using the bayonet catch.

Connecting the Patch Cable to an MX-Patch-Box, MX-NPA-Box or 
Standard Network Port

First remove the blue bayonet catch and the blue sealing 
plug in the right-hand connector on the box to establish the 
network connection to an MX-Patch-Box or MX-NPA-Box. 
Then insert the MOBOTIX patch cable into the box and secure 
the cable using the bayonet catch.

More information on installing an 

MX-Patch-Box

 or 

MX-NPA-

Box

 is available at 

www.mobotix.com

 under 

Products > 

Accessories > Functional Boxes

.

Insert the MOBOTIX patch cable of the S15 into the network port for standard connections 
(only permitted in indoor areas).

Connecting Peripheral Devices (MxBus, Microphone, Speaker)

The opening provided for the installation cable must be used 
for all other cables that are connected to the camera when 
using the MOBOTIX patch cable. Depending on the cable 
used, the single wire plug installed must be replaced with 
one of the other cable plugs (M.4/5). 

The cable used must be fixed to the circuit board using one of the cable ties supplied (M.9) 
to ensure that less strain is placed on the cable. The individual cable wires must be fixed 
on the screw clamps using the the screwdriver supplied (M.9).

When attaching modules 

with a total power con-

sumption of more than 

1 W (via MxBus/USB): 

Max. ambient tempera-

ture +50°C/122°F

Patch cable

Patch cable

Further cables

Содержание S15

































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды