Mobotix M25 SERIES, Руководство пользователя

Страница: 67 / 128

67
/128
Mounting the Camera with Ceiling Mount
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Procedure
1.
Convert to ceiling mount:
Simply remove the lock screw on the central joint and
exchange the wall mount for the supplied ceiling mount. Before fastening the ceil-
ing mount to the central joint (using the screw of the wall mount), the patch cable is
guided through one of the four openings.
2.
Install and prepare the network connection:
Guide
the pre-installed camera patch cable through one
of the four openings in the ceiling mount. This will
be connected later with the network cable using
a suitable adapter, for example, in a pre-installed
cavity socket.
3.
Drill the holes:
Use the supplied drilling template
for the camera (found at the end of the manual).
Drill the holes for the supplied screw anchors. Screw
anchors do not have to be fitted if the surface is
made of wood. To secure the mount, the supplied
stainless steel hex head screws will later be screwed
directly into the surface. In order to facilitate screw-
ing in wood, the positions should first be predrilled
using a 2 mm drill bit, for example (drilling depth
just slightly less than screw length).
4.
Attach ceiling seal:
Place the white rubber seal with
the groove on the edge of the ceiling mount.
No screw anchors
are required in
wooden surfaces