Mobotix M25 SERIES, Руководство пользователя

Страница: 54 / 128

54
/128
M25 Camera Manual: Installation
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Mounting to a Wall
The M25 can be mounted to the wall of a building or structures, even mobile surfaces, for
both indoor and outdoor use. The camera is mounted using the pre-installed
VarioFlex
mount (supplied as standard) , which is easily secured using the four enclosed screws
and screw anchors (depending on the surface, it can also be mounted without screw
anchors directly over the flush-mounted socket). The Ethernet connection cable of the
camera has already been guided through the mount and simply needs to be connected
with the network cable (e.g., by using an MX-Overvoltage-Protection-Box). By adjusting
the VarioFlex mount as required, the captured image area can be precisely adjusted to
the desired practical application.
The camera can be turned or tilted 180° horizontally
and 110° vertically (from –90° to +20°).
Mounting to a Ceiling
By exchanging the wall mount for the separately supplied ceiling mount, the M25 is ready
to be
mounted to ceilings in just a few easy steps thanks to the VarioFlex system. This
mounting option is of particular benefit when monitoring rectangular rooms with a single
camera. In such cases, the Super Wide Angle lenses B036 and B041 allow the room to
be monitored almost entirely by an M25 mounted to the ceiling in one of the corners.
Using the software-driven PTZ, you can easily zoom in on image details in either the live
image or the recording.
The camera can be turned or tilted 360° horizontally and 110°
vertically (from –90° to +20°).
Wall-mounted
• horizontally: 180°
• vertically: -90° to +20°
–90°
+20°
Mounting to a Wall
360°
Mounting to a Ceiling
Ceiling-mounted
• horizontally: 360°
• vertically: -90° to +20°