123
/128
Additional Notes
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
3.6.12 Safety Warnings
Installation Instructions:
• This product must not be used in locations exposed to the dangers of explosion.
• Make sure to install this product as shown in
Chapter 2, «Installation» of this manual.
• When installing this product, make sure that you are only using genuine MOBOTIX
parts and MOBOTIX connection cables.
• Make sure that you are installing this product on a solid surface that provides for a
sturdy installation of the fixing elements used.
Electrical installation:
Electrical systems and equipment may only be installed, modified
and maintained by a qualified electrician or under the direction and supervision of a
qualified electrician in accordance with the applicable electrical guidelines. Make sure to
properly set up all electrical connections.
Electrical surges:
MOBOTIX cameras are protected against the effects of small electrical
surges by numerous measures. These measures, however, cannot prevent the camera
from being damaged when stronger electrical surges occur. Special care should be taken
when installing the camera outside of buildings to ensure proper protection against
light-
ning
, since this also protects the building and the whole network infrastructure.
Max. power consumption of attached extension modules:
The power consumption of
all attached
MxBus modules
must
not exceed 2.5 W
. When attaching modules to the
MxBus connector
and
the USB connector, the
power consumption of all attached mod-
ules must not exceed 3 W
,
if the camera is powered by PoE class 3
. If
PoE class 2
is
used,
the power consumption of all attached modules must not exceed 1 W!
Never touch the lens:
Due to the high performance of the M25, the area of the image
sensor
can get quite hot
, especially when the ambient temperature is also high. This
does not affect the proper functioning of the camera in any way. For this reason, the
product must not be installed within the reach of persons without the lens cover.
Power off before opening the camera:
Make sure the power supply is disconnected
before opening the camera (i.e., for installing or replacing sensor modules and SD cards).
Network security: MOBOTIX
products include all of the necessary configuration options
for operation in Ethernet networks in compliance with data protection laws. The operator
is responsible for the data protection concept across the entire system. The basic settings
required to prevent misuse can be configured in the software and are password-protected.
This prevents unauthorized parties from accessing these settings.
Содержание M25 SERIES
Страница 19: ...19 128 M25 Allround MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com Notes...
Страница 85: ...85 128 MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com Notes...
Страница 125: ...125 128 Additional Notes MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com...