75
/128
Adjusting the Camera and Exchanging the Lens
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
2.5.3 Exchanging the Lens
The M25 can be shipped from the factory with seven MOBOTIX standard lenses (B036,
B041, B061, B079, B119, B237, B500) with the CSVario lens or the hemispheric B016 lens.
This procedure applies equally for all lenses.
Only lenses with CS or C mounts may be used with the CSVario version of the M25.
MOBOTIX lenses with M14 thread cannot be used. Similarly, the standard versions of the
M25 can only take the standard MOBOTIX lenses with M14 thread. The hemispheric B016
lens, C Mount and CS Mount lenses cannot be used. Upgrading to other model versions
is not possible.
Proceed as follows to change a lens:
1. Unmount the
lens cover by turning it counter-clockwise
.
2. Remove the
lens
by turning it counter-clockwise.
3.
Screw the new lens
(if present) back into the camera and
restore the
power supply
of the camera.
4.
Adjust the image sharpness
according to the camera’s
live image on the computer monitor. Make sure that you
do not screw in the lens too far or by using excessive
force, since doing so may damage the lens mount.
5.
Screw the lens cover onto the lens again
and clean it,
if required, using a clean, lint-free cotton cloth.
The focusing aid provides a visual aid when setting the image
sharpness of a MOBOTIX camera lens (see
Section 4.3.3 , «Image
and Audio Settings, Quick Controls» in the Software Manual).
The white ring in the
lens cover prevents
the camera LEDs from
adding light reflec-
tions to images
Содержание M25 SERIES
Страница 19: ...19 128 M25 Allround MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com Notes...
Страница 85: ...85 128 MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com Notes...
Страница 125: ...125 128 Additional Notes MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com...
