72
/128
M25 Camera Manual: Installation
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
Procedure
1.
Prepare the cable:
Guide the on-site network cable from
behind through the middle opening of the pole mount.
Ideally, the cable should be guided directly from the
pole into the cavity socket of the VarioFlex Wall Mount,
where it is connected with the camera patch cable via
an adapter (e.g., the MX-Overvoltage-Protection-Box)
to conceal the cabling.
2.
Prepare the straps:
Guide the two stainless steel straps
through the pole mount. The pole must have a diameter
between 60 mm and 180 mm.
3.
Attach pole mount:
Place the straps around the pole
and tighten them using the screwdriver. If required, clip
the ends of the stainless steel straps.
4.
Apply rubber seal:
Place the white rubber seal with
the groove on the edge of the wall mount.
5.
Connect the cable:
Connect the on-site network cable
to the camera patch cable using an adapter or insert
the patch cable into the RJ45 outlet. When using a
MX-Overvoltage-Protection-Box, follow the installa-
tion instructions supplied with the product. You can
download the PDF file from the MOBOTIX website
www.mobotix.com
in the
Support > Manuals
section.
Make sure that the cables are not bent or squashed.
Содержание M25 SERIES
Страница 19: ...19 128 M25 Allround MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com Notes...
Страница 85: ...85 128 MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com Notes...
Страница 125: ...125 128 Additional Notes MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com...