![MMM Medcenter CLIMACELL 111 Скачать руководство пользователя страница 36](http://html1.mh-extra.com/html/mmm-medcenter/climacell-111/climacell-111_operating-instructions-manual_1813970036.webp)
Operating instructions
CLIMACELL
Page 35
CLIMACELL_PCH_en_np_mmm
!
0208
V1.07_Blue Line
7 Warranty and service
Warranty is guaranteed by MMM for satisfactory delivery and functioning of the ovens
within the contractual regulations and the period of the warranty.
MMM does not cover any deficiencies or damages due to normal wear and tear, chemical or
physical attack, excessive overload, incorrect handling or due to the ovens being used in a
way in which it was not intended to be used, particularly in case of non-observance of the
enclosed operating instructions, incorrect installation resp. start-up by the customer or a third
party, as well as in the case of damage to the system caused by foreign objects or
inadequate maintenance and repairs.
If you send the unit back to the manufacturer (for example for a repair or if you claim to
change it) use the original wrapping. Otherwise you are responsible for a possible damage
by transport and the manufacturer will claim a compensation for repairing the damages
caused by transport.
For the correct connection of the ovens to the power supply the technical data and operating
instructions are to be observed.
Important note:
MMM (producer) is responsible for safety-technical parameters of the unit only if all repairs
and adjustments are carried out by producer or another by producer authorised organisation
and if the parts used in repair will be replaced by spare parts approved by producer and
corresponding to the quality standard of MMM.
MMM recommends the user of the unit to require a protocol of the repairing firm about art
and range of procedures, eventually report about changes of the nominal data or working
range, date of repair, name of the firm and signature.
To connect the unit to the mains properly follow the technical data and operating instructions.
8 Transport and storage
Device will be prepared for transport by a competent person (who also disconnects the
device from the mains). Device must be transported and stored in original wrapping. If you
send the device back (for reparation or change in case of reclamation), use the original
wrapping. Otherwise you overtake the responsibility for event. damaging during the transport
and the producer will reclaim compensation for event. additional reparations. Device can be
stored in the ambient temperatures of 0
°
C to 40
°
C.
9 How to eliminate wrappings and a unit out off service
a) pallet – in a refuse incinerating plant
b) cardboard –waste for recycling
c) unit out off service – elimination should be done by a licensed firm, the unit does not
contain any toxins