manualshive.com logo in svg

MMM Medcenter CLIMACELL 111, Руководство по эксплуатации

Поделиться
Скачать
MMM Medcenter CLIMACELL 111 Скачать руководство пользователя страница 15

Operating instructions                                              CLIMACELL                                                                   Page 14

                                                         

V 1.07_Blue Line            CLIMACELL_PCH_en_np_mmm 

!

 0208

depress X/W and put the cursor to the position of RH units, set 9, go to the position of RH
tens and set the further value over 9 – this position is OFF.

4.4.13   Setting the operating conditions of temperature and relative humidity and their
limitations

Relation  between  the  operating  temperature  (T 

°

C) and the operating relative humidity

(RH %) in setting the operating parameters of the cabinet is shown by the enclosed diagram.
The hatched surface is limiting the area of achievable operating parameters.

If the cabinet is supplied with the door lighting, a different diagram is valid, see hereafter:

Содержание CLIMACELL 111







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды