MKS Instruments UK Ltd
V2000-P Hardware Manual
– SP102006.103 March 2013
7
Warning Symbols
Various warning labels and symbols may be attached to the instrument their general use is explained below.
Warning!
Danger of an electric shock.
Warning!
Danger of personal injury or damage to the unit. Refer
to manual for instruction
Warning!
Hot surface.
PE (Protective Earth)
All equipment external to the RVC must be earthed at
this point.
Fuses
The Vision 2000-P systems must be powered down and disconnected from the mains supply before changing
any fuses.
See the RVC2 User Manual for the fuse locations and values.
Electrical Connections
The Vision 2000-P must be powered down and isolated from the mains power supply before any electrical
connections are made.
On the rear panel of the Microvision2 there are no hazardous voltages on any of the ports (electrical connectors).
Connections must not be made that may place hazardous voltages or currents on these ports. MKS Instruments
must be consulted before any non-MKS Instruments cables or accessories are connected to these ports. Consult
the relevant manual for detailed descriptions of these connectors.
If you are unclear about any of the safety information contained in this section of the manual please contact your
local MKS Instruments facility before proceeding.
