manualshive.com logo in svg

MJ Research DNA Engine Dyad PTC-220, Руководство по эксплуатации

Поделиться
Скачать
MJ Research DNA Engine Dyad PTC-220 Скачать руководство пользователя страница 55

5-17

Creating Programs

Place the cursor in the 

Maintain lid temperature at field and select the field. We

have decided to set the lid to a constant temperature of 100

°

C.

• Enter 100 from the numeric keypad.

Place the cursor in the 

below field and select the field. We have decided to turn

the lid off when the block drops below 30

°

C.

• Enter 30 from the numeric keypad.

• Select <OK>.

We have returned to the Mode Selection window.

• Select <OK>.

We have returned to the graphical programming window. It is from this location
that you will add steps using the <Temp>, <Gradient>, and <Goto> options.
Additionally, buttons running across the window bottom provide options to <De-
lete Step>, <Save + Run>, <Save>, or <Save As> programs, and <Cancel> the
current programming session.

Using the File Save As Window

The <Save> and <Save As> buttons are probably the most important buttons in
the graphical programming window, since a program that is saved can be used
or edited at a later date.

Please note that a new graphical program must be renamed using the <Save As>
feature prior to initiating a run. “TEMPLATE” is not a valid name nor can a graphi-
cal program with the default name, “TEMPLATE”, be run. This restriction is de-
signed to ensure that programs are appropriately saved.

• Select <Save As>.

Содержание DNA Engine Dyad PTC-220






























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды