manualshive.com logo in svg

MJ Research DNA Engine Dyad PTC-220, Руководство по эксплуатации

Поделиться
Скачать
MJ Research DNA Engine Dyad PTC-220 Скачать руководство пользователя страница 20

384-Well Microplate Specifics

Some users find that a 384-well microplate can be difficult to remove from the 384-well
block after completing their thermal cycling protocol. The plate fits very snugly in the block,
and the 384 points of contact can provide a significant amount of friction. Fortunately, it is
relatively simple to ameliorate this problem if it occurs in your application.

In our experience, a very thin coating of a Teflon®-based dry lubricant sprayed onto the
block will solve the sticking problem very effectively. The coating eventually wears off so the
block should be re-coated as needed, probably about once every 10 to 20 runs. Your
experience will be the best guide in establishing the frequency for re-coating. As you will
see, a very thin coat is sufficient to eliminate any sticking.

TFE (tetra-fluoroethylene) dry lubricant is available from many sources. One source in the
United States is:

Miller-Stephenson Chemical Co., Inc.
in Danbury, CT:  203-743-4447
in Morton Grove, IL:  847-966-2022
in Sylmar, CA:  818-896-4714

TFE Dry Lubricant/Release Agent
Cat.# MS-122DF (aerosol, 10oz can)  approx. $10.50/can

Here are some guidelines for applying the TFE lubricant.

1. Cool the block and lid to room temperature (below 38

°

C).

2. Cover the lid and any other areas that you don’t want to get slippery.

3. Shake the can well.

4. Spray for about 1 second onto the block.

3-6

DNA Engine Dyad Operations Manual

Содержание DNA Engine Dyad PTC-220






























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды