manualshive.com logo in svg

MJ Research DNA Engine Dyad PTC-220, Руководство по эксплуатации

Поделиться
Скачать
MJ Research DNA Engine Dyad PTC-220 Скачать руководство пользователя страница 141

Appendix C: Shipping Instructions

C-1

Appendix C

Shipping Instructions for US Residents

Users residing in the United States should follow these instructions for shipping a machine to
MJ Research for factory repair or an upgrade. Users outside of the United States should send
machines to their distributor, in accordance with shipping instructions obtained from the
distributor.

1. Call MJ Research (888-652-9253) to obtain a return materials authorization (RMA) num-

ber. Machines returned without an RMA will be refused by the Receiving Department.

2. Thoroughly clean the machine, removing excess oil and radioactive and other

biohazardous substances. To protect the health of our employees, MJ Research will not
repair or upgrade any machine that is excessively oily or that emits ionizing radiation
upon arrival at our factory. 

PLEASE ELIMINATE ALL BIOHAZARDS AND RADIA-

TION!

3. Pack the machine in its original packaging. If this has been misplaced or discarded, call

MJ Research to request shipment of packaging materials. You can also request a loaner
machine, which will be provided if available (a rental fee may apply). You can use the
loaner’s packaging to return the machine needing repair.

Remove the Alpha unit from the DNA Engine Dyad base before shipping. All warranties
are voided if a machine is shipped with an Alpha unit installed. If the Alpha unit also
needs to be shipped, pack it in its original packaging materials.

4. Write the RMA number on the outside of the box.

5. Ship the machine (freight prepaid) to the following address. We recommend you pur-

chase insurance from your shipper.

Ship to:

Repair Department
MJ Research, Incorporated
590 Lincoln Street
Waltham, MA  02451

Содержание DNA Engine Dyad PTC-220






























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды