Mitsubishi Lancer Sportback, Руководство пользователя, Страница: 61 / 433

Rear hatch LOCK switch*
By locking the vehicle using the keyless en-
try system or the keyless operation function,
the system preparation mode is activated.
The security indicator (D) in the audio panel
blinks for confirmation.
NOTE
l The system preparation mode is not activated
when the doors and rear hatch have been
locked using a method other than the keyless
entry system or the keyless operation func-
tion (namely a key, the inside lock knob or
the central door lock switch).
l If the bonnet is open, the security indicator il-
luminates, and the system does not enter the
system armed mode.
When the bonnet is closed, the system enters
the system preparation mode, and after ap-
proximately 20 seconds the system enters the
system armed mode.
4. After approximately 20 seconds, the buzzer
stops, and when the blinking of the security
indicator starts to slow down, the system
armed mode goes into effect.
The security indicator continues to blink dur-
ing the system armed mode.
NOTE
l The security alarm system can be activated
when people are riding inside the vehicle or
when the windows are open. To prevent acci-
dental activation of the alarm, do not set the
system to the system armed mode while peo-
ple are riding in the vehicle.
l Avoid leaving valuable items inside the vehi-
cle even when the security alarm system has
been set to the “active” mode.
To deactivate the vehicle inclination detection
function and the interior intrusion detection func-
tion
E00312100217
The vehicle inclination detection function and the
interior intrusion detection function can be deacti-
vated when parking in automated car parks, when
leaving pets in the vehicle or when leaving the ve-
hicle with the windows slightly open.
1. Turn the ignition switch to the “LOCK” posi-
tion. If you started the engine with the key,
remove the key from the ignition switch.
2. Raise and hold the wiper and washer switch
to the “MIST” position for approximately 3
seconds. The buzzer will sound once and the
function will be deactivated.
To activate the function again, raise and hold the
wiper and washer switch to the “MIST” position
for approximately 3 seconds.
The buzzer will sound twice and the function will
be activated.
Locking and unlocking
1-38
1
OG4E12E1