Mitsubishi Lancer Sportback, Руководство пользователя, Страница: 170 / 433

Ignition switch
E00601401601
[For vehicles equipped with keyless operation
system]
For information on operations for vehicles equip-
ped with the keyless operation system, refer to
“Keyless operation system: Ignition switch” on pa-
ges 1-11 and 1-18.
[Except for vehicles equipped with keyless oper-
ation system]
Vehicles with M/T Vehicles with CVT or
Twin Clutch SST
LOCK
The engine is stopped and the steering wheel
locked. The key can only be inserted and removed
in this position.
ACC
The engine is stopped, but the audio system and oth-
er electric devices can be operated.
ON
The engine is running, and all the vehicle’s electri-
cal devices can be operated.
START
The starter motor operates. After the engine has star-
ted, release the key and it will automatically return
to the “ON” position.
NOTE
l
Your vehicle is equipped with an electronic
immobilizer.
To start the engine, the ID code transmitted
by the transponder inside the key must match
the code registered in the immobilizer com-
puter. Refer to “Electronic immobilizer (Anti-
theft starting system)” on page 1-03.
ACC power auto-cutout function
E00620300149
After about 30 minutes has elapsed with the igni-
tion switch in the “ACC” position, the function au-
tomatically cuts out the power for the audio system
and other electric devices that can be operated with
that position.
When the ignition switch is turned from the “ACC”
position, the power is supplied again to those devi-
ces.
NOTE
l It is possible to modify functions as follows:
• The time until the power cuts out can be
changed to approximately 60 minutes.
• The ACC power auto-cutout function can
be deactivated.
For details, we recommend you to consult a
MITSUBISHI MOTORS Authorized Service
Point.
On vehicles equipped with MITSUBISHI
Multi-Communication System (MMCS),
screen operations can be used to make the ad-
justment.
Refer to the separate owner’s manual for de-
tails.
To remove the key
E00620400254
For vehicles equipped with a M/T, when removing
the key, push the key in at the “ACC” position and
keep it depressed until it is turned to the “LOCK”
position, and remove it.
Starting and driving
4-13
4
OG4E12E1