Mitsubishi Lancer Sportback, Руководство пользователя, Страница: 232 / 433

NOTE
l While the engine coolant temperature is low,
the temperature of the air from the heater
will be cool/cold until the engine warms up,
even if you have selected warm air with the
dial.
Air selection switch
E00734300011
To change the air selection, simply press the air se-
lection switch.
A sound will be made every time you push the
switch.
l Outside air: Indication lamp (A) is OFF
Outside air is introduced into the passenger
compartment.
l Recirculated air: Indication lamp (A) is ON
Air is recirculated inside the passenger com-
partment.
CAUTION
l Normally, use the outside position to keep
the windscreen and side windows clear
and quickly remove fog or frost from the
windscreen.
If the outside air is dusty or otherwise con-
taminated use the recirculation position.
Switch to the outside position periodically
to increase ventilation so that the win-
dows do not become fogged up.
l Use of the recirculation position for exten-
ded time may cause the windows to fog up.
NOTE
l When the heater operates with the selection
switch in the outside position, the system au-
tomatically determines whether to continue
using outside air or to perform recirculation.
If the outside air temperature is high, the sys-
tem selects recirculation and causes the indi-
cation lamp (A) in the switch to illuminate.
Press the selection switch to return to outside
air introduction.
Customizing the air selection (Changing function
settings)
E00734500013
Functions can be changed as desired, as stated below.
l Enable automatic air control:
When the heater operates, the air selection
switch will be automatically controlled.
l Disable automatic air control:
Even when the heater operates, the air selec-
tion switch will not be automatically control-
led.
l Setting change method
Hold down the air selection switch for about
10 seconds or more.
When the setting is changed, a sound is emit-
ted and the indication lamp flashes.
• When the setting is changed from enable
to disable 3 sounds are emitted and the in-
dication lamp flashes 3 times.
• When the setting is changed from disable
to enable 2 sounds are emitted and the in-
dication lamp flashes 3 times.
NOTE
l The factory setting is “Enable automatic air
control.”
l When the mode selection dial is turned to
“
”, in order to prevent misting of the win-
dows the ventilator automatically switches to
outside air even if “Disable automatic air con-
trol” is set.
Operating the heater system
E00734600014
Heating
Set the mode selection dial to the “ ” position
and set the air selection switch (A) to the outside po-
sition.
For pleasant driving
5-05
5
OG4E12E1