Mitsubishi Lancer Sportback, Руководство пользователя, Страница: 119 / 433

1. Press and hold the multi-information meter
switch for about 2 seconds or more to switch
from the setting mode screen to the menu
screen.
Refer to “Changing the function settings
(when the ignition switch is “ON”)” on page
3-18.
2. Lightly press the multi-information meter
switch to select “AVG (average fuel consump-
tion and average speed setting)”.
Type 1
Type 2
3. Press and hold the multi-information meter
switch for about 2 seconds or more to switch
in sequence from A or 1 (Auto reset mode)
→ M, 2 or P (Manual reset mode) → A or 1
(Auto reset mode).
The setting is changed to the selected mode
condition.
Manual reset mode
l When the average fuel consumption and aver-
age speed are being displayed, if you hold
down the multi-information meter switch,
the average fuel consumption and average
speed displayed at that time are reset.
l
When the ignition switch is switched from
“ACC” or “LOCK” to “ON”, the mode set-
ting is automatically switched from manual
to auto.
Switching to auto occurs automatically. If
switching to manual mode is done, however,
the data from the last reset is displayed.
Auto reset mode
l When the average fuel consumption and aver-
age speed are being displayed, if you hold
down the multi-information meter switch,
the average fuel consumption and average
speed displayed at that time are reset.
l If the ignition switch is at “ACC” or
“LOCK” for about 4 hours or longer, the aver-
age fuel consumption display and average
speed display are automatically reset.
NOTE
l The memory of the auto reset mode or man-
ual reset mode for the average speed display
is erased if the battery is disconnected.
l The initial (default) setting is “Auto reset
mode”.
Changing the fuel consumption display unit
E00523000625
The display unit for fuel consumption can be switch-
ed. The distance, speed, and amount units are also
switched to match the selected fuel consumption
unit.
1. Press and hold the multi-information meter
switch for about 2 seconds or more to switch
from the setting mode screen to the menu
screen.
Refer to “Changing the function settings
(when the ignition switch is “ON”)” on page
3-18.
2. Lightly press the multi-information meter
switch to select “AVG UNIT (fuel consump-
tion display setting)”.
Type 1
Type 2
3. Press and hold the multi-information meter
switch for about 2 seconds or more to dis-
play “AVG UNIT” (fuel consumption dis-
play unit setting).
Instruments and controls
3-20
3
OG4E12E1