manualshive.com logo in svg

Mitsubishi 2015 OUTLANDER SPORT/RVR, Руководство пользователя

Поделиться
Скачать
Mitsubishi 2015 OUTLANDER SPORT/RVR Скачать руководство пользователя страница 70

Keyless entry system (if so equipped)

Features and controls

5-7

5

N00562301111

Your electronic immobilizer operates on a
radio frequency subject to Federal Communi-
cations Commission (FCC) Rules (For vehi-
cles sold in U.S.A.) and Industry Canada
Rules (For vehicles sold in Canada). This
device complies with part 15 of FCC Rules
and Industry Canada licence-exempt RSS
standard(s).
Operation is subject to the following two con-
ditions.

This device may not cause harmful inter-
ference.

This device must accept any interference
received, including interference that may
cause undesired operation.

N00509001933

Press the remote control transmitter buttons
to lock or unlock the doors and the liftgate.

It can also help you signal for attention by
setting off the panic alarm.

Press the LOCK button (1) to lock all the
doors and the liftgate.
The turn signal lights will also blink once.

Press the UNLOCK button (2) to unlock the
driver’s door only.
Within about 2 seconds, press the UNLOCK
button one more time to unlock all the doors
and liftgate.
The dome light will turn on for 30 seconds.
The turn signal lights will also blink twice.
The front side-marker and parking lights will
also turn on for about 30 seconds. Refer to
“Welcome light” on page 5-125.

The horn and turn signal lights of the keyless
entry system answerback function can be
changed as required. This is done with the
key removed from the ignition switch.

General information 

CAUTION

Changes or modifications not expressly
approved by the manufacturer for compli-
ance could void the user’s authority to oper-
ate the equipment.

Keyless entry system (if so 
equipped) 

1- LOCK ( ) button
2- UNLOCK ( ) button
3- PANIC button
4- Indicator light

To lock 

NOTE

If you press the LOCK button (1) twice the
horn will sound once.

To unlock 

NOTE

The door and liftgate unlock function can be
set so that all doors and liftgate unlock when
the UNLOCK button (2) is pressed once.
Refer to “Setting the door and liftgate unlock
function” on page 5-8.

Answerback function 

NOTE

The answerback function will not operate if
any of the doors are open.

BK0206700US.book  7 ページ  ２０１４年３月２５日　火曜日　午後４時４２分

Содержание 2015 OUTLANDER SPORT/RVR

































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды