Mitsubishi 2015 OUTLANDER SPORT/RVR, Руководство пользователя

Страница: 142 / 384

Rear-view camera (if so equipped)
Features and controls 5-79
5
 Wheels other than Mitsubishi genuine
wheels are being used.
 Wheels that are not fitted with tire infla-
tion pressure sensors are being used.
 Wheels whose ID codes are not memo-
rized by the vehicle are used.
 Compact spare tire is fitted on a road
wheel.
 A window tint that affects the radio wave
signals is installed.
N00532901192
If new wheels with new tire inflation pressure
sensors are installed, their ID codes must be
programmed into the tire pressure monitoring
system. Have the tire and wheel replacement
performed by an authorized Mitsubishi
Motors dealer to avoid the risk of damaging
the tire inflation pressure sensors. If the
wheel replacement is not done by an autho-
rized Mitsubishi Motors dealer, it is not cov-
ered by your warranty.
N00533001246
Your tire pressure monitoring system oper-
ates on a radio frequency subject to Federal
Communications Commission (FCC) Rules
(For vehicles sold in U.S.A.) and Industry
Canada Rules (For vehicles sold in Canada).
This device complies with part 15 of FCC
Rules and Industry Canada licence-exempt
RSS standard(s).
Operation is subject to the following two con-
ditions.
 This device may not cause harmful inter-
ference.

This device must accept any interference
received, including interference that may
cause undesired operation.
N00546201183
When the gearshift lever or the selector lever
is in the “R” position with the ignition switch
or the operation mode is in ON, the rear-view
image will be displayed on the screen of the
Mitsubishi Multi-Communication System or
the DISPLAY AUDIO in the center panel.
When the gearshift lever or the selector lever
is shifted out of the “R” position, the rear-
view image will go off.
NOTE
 Tire inflation pressures vary with the ambi-
ent temperature. If the vehicle is subjected to
large variations in ambient temperature, the
tire inflation pressures may be under-inflated
(causing the warning light/display to come
on) when the ambient temperature is rela-
tively low. If the warning light/display
comes on, adjust the tire inflation pressure.
Whenever the tires and wheels
are replaced with new ones
CAUTION
 The use of non-genuine wheels will prevent
the proper fit of the tire inflation pressure
sensors, resulting air leakage or damage of
the sensors.
General information
CAUTION
 Changes or modifications not expressly
approved by the manufacturer for compli-
ance could void the user’s authority to oper-
ate the equipment.
Rear-view camera (if so
equipped)
WARNING
 Never rely solely on the rear-view camera
to clear the area behind your vehicle.
Always check visually behind and all
around your vehicle for persons, animals,
obstructions or other vehicles. Failure to
do so can result in vehicle damage, serious
injury or death.
 The rear-view camera is an aid system for
backing up, but it is not a substitute for
your visual confirmation.
BK0206700US.book 79 ページ ２０１４年３月２５日 火曜日 午後４時４２分