manualshive.com logo in svg

Mitsubishi 2015 OUTLANDER SPORT/RVR, Руководство пользователя

Поделиться
Скачать
Mitsubishi 2015 OUTLANDER SPORT/RVR Скачать руководство пользователя страница 264

Automatic air conditioning-Type1  (if so equipped)

Comfort controls

7-17

7

Disable automatic air control:
Even when the mode selection dial or the
blower speed selection dial is set to the
“AUTO” position, the air selection switch
will not be automatically controlled.

Changing the settings
Press the air selection switch for about 10
seconds or longer.
When the setting has changed, the system
will beep and the indicator light will flash.

• When the setting has changed from

enabled to disabled, the system will beep
three times and the indicator will flash
three times.

• When the setting has changed from dis-

abled to enabled, the system will beep
two times and the indicator light will
flash three times.

N00737300200

Push the switch, and the air conditioning
compressor will turn on. The air conditioning
indicator light (A) will come on.
A sound will be made every time you push
the switch.

Push the switch again and the air condition-
ing compressor will stop and the indicator
light (A) goes off.

N00759800045

You can change the following functions to
match your preference.

NOTE

The factory setting is “Enable automatic air
control”.

While the mode selection dial is set between
“

” and “

” position, the air selection

will automatically change to the outside air
position, even if the system is set to “Disable
automatic air control”, in order to prevent
windows from fogging up.

Air conditioning switch

 

CAUTION

Using the air conditioning slightly increases
the engine idle speed. Therefore, make sure
your foot is firmly on the brake pedal when
shifting the transaxle into drive.

NOTE

If a problem is detected in the air condition-
ing compressor, the air conditioning indica-
tor light (A) blinks. Press the air
conditioning switch once to turn it off, then
once more to turn it back on. If the air condi-
tioning indicator light does not blink there is
no problem. If it does blink, have it checked
at an authorized Mitsubishi Motors dealer or
a repair facility of your choice.

Sometimes, for example after using a high-
pressure car wash, the condenser can get wet,
and the air conditioning indicator light (A)
blinks temporarily. Wait for a while, press
the air conditioning switch once to turn the
system off, then once more to turn it back on.
Once the water evaporates, the blinking will
stop.

Personalizing the air conditioning 
switch (Changing the function set-
ting)

 

BK0206700US.book  17 ページ  ２０１４年３月２５日　火曜日　午後４時４２分

Содержание 2015 OUTLANDER SPORT/RVR

































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды