Mitsubishi 2015 OUTLANDER SPORT/RVR, Руководство пользователя

Страница: 252 / 384

Manual air conditioning-Type 1 (if so equipped)
Comfort controls 7-5
7
N00736700151
To change the amount of air flowing from the
vents, turn the mode selection dial. Refer to
“Changing the mode selection” on page 7-2.
N00736800383
Normally, use the outside air position to keep
the windshield and side windows clear and to
quickly remove fog or frost from the wind-
shield.
To change the air selection, simply press the
air selection switch. A sound will be made
every time you push the switch.
 Outside air {Indicator light (A) OFF}
 Recirculated air {Indicator light (A) ON}
When the air conditioning turns on, the air
selection is controlled automatically.
When the air conditioning turns off, the air
selection automatically goes back to the out-
side air position.
The air selection indicator light (A) shows the
selected position.
If the outside air is dusty or contaminated in
some way, use the recirculation position.
Switch to the outside air position every now
and then to keep the windows from fogging
up.
Mode selection dial
Air selection switch
NOTE

When the air conditioning operates with the
air selection switch in the outside air posi-
tion, the system automatically determines
whether to continue using outside air or to
perform recirculation.
If the outside temperature is high, the system
selects recirculation to achieve rapid cooling
and causes the air selection indicator in the
switch to illuminate. When the air condition-
ing turns off or the blower speed selection
dial is set to the “OFF” position, the air
selection automatically goes back to the out-
side air position.
CAUTION

Using recirculated air for a long time may
cause the windows to fog up.
NOTE
 While the mode selection dial is set between
“
” and “ ” position, the air condition-
ing compressor will run automatically. The
outside air position will also be selected
automatically. (In this case, the air condition-
ing indicator will not change.)
 When the temperature control dial is set to
the “MAX A/C” position, the air selection
will be automatically set to the recirculation
position.
 When the temperature control dial is in the
“MAX A/C” position, if it is set to a position
other than “MAX A/C”, the setting for the
air selection switch is selected as described
below. The selection of recirculated air or
outside air depends on the setting before
“MAX A/C” was used.
• If automatic control was set:
Automatic control is continued
• If recirculated air was selected:
Recirculated air is selected
BK0206700US.book 5 ページ ２０１４年３月２５日 火曜日 午後４時４２分