manualshive.com logo in svg

Mitsubishi 2015 OUTLANDER SPORT/RVR, Руководство пользователя

Поделиться
Скачать
Mitsubishi 2015 OUTLANDER SPORT/RVR Скачать руководство пользователя страница 258

Manual air conditioning-Type 2  (if so equipped)

Comfort controls

7-11

7

When the air conditioning turns on, the air
selection is controlled automatically.
The air selection indicator light (A) shows the
selected position.

If the outside air is dusty or contaminated in
some way, use the recirculation position.
Switch to the outside air position every now

and then to keep the windows from fogging
up.

N00702100044

You can change the following functions to
match your preference.

Enable automatic air control:
When the air conditioning operates, the
air selection switch will be automatically
controlled.

Disable automatic air control:
Even when the air conditioning operates,
the air selection switch will not be auto-
matically controlled.

Changing the settings
Press the air selection switch for about 10
seconds or longer.
When the setting has changed, the system
will beep and the indicator light will flash.

• When the setting has changed from

enabled to disabled,
the system will beep three times and the
indicator will flash three times.

• When the setting has changed from dis-

abled to enabled,
the system will beep two times and the
indicator light will flash three times.

N00731000364

Push the switch, and the air conditioning
compressor will turn on. The air conditioning
indicator light (A) will come on.
A sound will be made every time you push
the switch.

NOTE

When the air conditioning operates with the
air selection switch in the outside air posi-
tion, the system automatically determines
whether to continue using outside air or to
perform recirculation.
If the outside temperature is high, the system
selects recirculation to achieve rapid cooling
and causes the air selection indicator in the
switch to illuminate. Press the air selection
switch to return to outside air.

CAUTION

Using recirculated air for a long time may
cause the windows to fog up.

NOTE

While the mode selection dial is set to the
“

” position, the air conditioning com-

pressor will run automatically. The outside
air position will also be selected automati-
cally.

Personalizing the air selection 
(Changing the function setting)

 

NOTE

The factory setting is “Enable automatic air
control”.

While the mode selection dial is set to the
“

” position, the air selection will auto-

matically change to the outside air position,
even if the system is set to “Disable auto-
matic air control”, in order to prevent win-
dows from fogging up.

Air conditioning switch

 

BK0206700US.book  11 ページ  ２０１４年３月２５日　火曜日　午後４時４２分

Содержание 2015 OUTLANDER SPORT/RVR

































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды