Mitsubishi MOTORS LANCER EVOLUTION Скачать руководство пользователя страница 162

Страница: 162 / 330

After a while, check that the warning display

has gone out. If the display goes out, the vehicle

can be driven normally. If the warning display re-

mains on or comes on frequently, have the vehicle

checked by a MITSUBISHI MOTORS Authorized

Service Point.

CAUTION

If the warning display is shown, such

as when the vehicle does not accelerate

while traveling even if the accelerator

pedal is depressed, the vehicle may not be

able to be driven normally.

For safety, pay attention to your sur-

roundings when driving the vehicle.

NOTE

If the vehicle is continuously driven on hilly

roads or in a sporty manner, the vehicle may

vibrate.

This vibration is to alert the driver that the

Twin Clutch SST fluid temperature has ris-

en. It does not indicate a malfunction.

If this occurs, perform the same measures for

when the warning appears. If the vibration

stops, the vehicle can be driven normally.

If vehicle is driven with warning displayed

If the vehicle continues to be driven after the

warning display and “SLOW DOWN” appear, and

the temperature of the Twin Clutch SST fluid con-

tinues to rise, the transmission protection control

may operate and cause the transmission to function

as if the gearshift lever was in the “N” (NEU-

TRAL) position.

(At this time, the vehicle temporarily cannot be

driven.)

If this occurs, take the following measures.

1. Depress the brake pedal and stop the vehicle

in a safe place.

2. Place the gearshift lever in the “P” (PARK)

position, and then open the bonnet with the

engine running to cool the engine.

3. After a while, check that the warning dis-

play has gone out, and then stop the engine if

the warning display has gone out.

4. If the engine can be restarted, the vehicle can

be driven normally.

If the warning display remains on or comes on fre-

quently, have the vehicle checked by a

MITSUBISHI MOTORS Authorized Service

Point.

When warning display is showing

E00626900020

A safety device in the Twin Clutch SST has been

activated due to a possible malfunction in the Twin

Clutch SST or in the engine electronic control

module.

If this occurs, perform the following procedure.

1. Park your vehicle in a safe place and stop the

engine.

2. Restart the engine.

If the warning display goes out, there is no ab-

normal condition.

If the warning display remains on or comes on fre-

quently, have the vehicle checked by a

MITSUBISHI MOTORS Authorized Service Point

as soon as possible.

CAUTION

If the warning display is shown, such

as when the vehicle does not accelerate

while traveling even if the accelerator

pedal is depressed, the vehicle may not be

able to be driven normally.

For safety, pay attention to your sur-

roundings when driving the vehicle.

Operation of the Twin Clutch SST

E00622000081

CAUTION

Before selecting a position with the en-

gine running and the vehicle stationary,

fully depress the brake pedal to prevent

the vehicle from creeping.

The vehicle will begin to move as soon as

the Twin Clutch SST is engaged, the

brakes should only be released when you

are ready to drive away.

Depress the brake pedal with the right

foot at all times.

Using the left foot could cause driver

movement delay in case of an emergency.

To prevent sudden acceleration, never

race the engine when shifting from the

“P” (PARK) or “N” (NEUTRAL) posi-

tion.

Operating the accelerator pedal while the

other foot is resting on the brake pedal

will affect braking efficiency and may

cause premature wear of brake pads.

Starting and driving

4-24

OCZE14E3

Содержание LANCER EVOLUTION











































































































































































































































































































































Результаты поиска

Содержание LANCER EVOLUTION

Отзывы:

Похожие инструкции для LANCER EVOLUTION

Бренды по названию

Популярные бренды

Mitsubishi MOTORS LANCER EVOLUTION, Руководство пользователя

Результаты поиска

Содержание LANCER EVOLUTION

Отзывы:

Похожие инструкции для LANCER EVOLUTION

Бренды по названию

Популярные бренды