Mitsubishi MOTORS LANCER EVOLUTION Скачать руководство пользователя страница 158

Страница: 158 / 330

Twin Clutch SST

control mode

Characteristic

NORMAL (Control

mode when engine

is started)

Control mode for normal

driving on local roads, ex-

pressways, and the like.

Smooth shifting is per-

formed at low engine

speeds for economical driv-

ing with good ride quality.

SPORT

Control mode for driving

on mountain roads, roads

with uphill and downhill

slopes, and expressways

with long downhill slopes

where engine braking is

necessary.

Compared to “Normal”

mode, shifting occurs at

higher engine speeds and is

quicker. In addition, quick

downshifting is possible

when the accelerator pedal

is depressed for quick ac-

celeration or when the

brakes are applied.

S-Sport (Super

Sport)

In the “S-Sport” mode,

shifting occurs at higher en-

gine speeds and is even

quicker than in the “Sport”

mode.

“S-Sport” mode is designed

to be used while driving on

closed circuit tracks. Do

not use this mode on public

roads.

NOTE

Damage to your vehicle caused by racing

and/or driving on closed circuit tracks will

not be covered under warranty. Please re-

view the “Service booklet: NEW VEHICLE

LIMITED WARRANTY”.

When continuously driving on closed circuit

tracks or at other locations where the engine

is operated at high speeds and under a heavy

load, the Twin Clutch SST fluid temperature

will have a tendency to rise.

In this case, if the temperature rises too high,

both “SLOW DOWN” and the warning

display will appear on the information screen

in the multi-information display to alert the

driver.

If the warning display appears, be sure to

refer to “Warning display” on page 4-23

and follow the appropriate measures.

The Twin Clutch SST control mode can be

selected both when “D” range operation is

selected and when manual shifting is selec-

ted.

If you select “Sport” mode or “S-Sport”

mode while the engine is cold, the transmis-

sion may shift up at different speeds com-

pared to that when the engine is warm.

This is simply the operation of the control

system to warm the engine quickly. It does

not indicate a malfunction.

For slippery road surfaces, such as roads

with accumulated snow, “Normal” mode is

recommended for smooth shifting at low en-

gine speeds.

Twin Clutch SST control mode switch

E00621400192

When the ignition switch is set to the “ON” posi-

tion, operate the Twin Clutch SST control mode

switch (A) to change the control mode.

When the engine is started, the control mode is au-

tomatically set to the “Normal” mode. Use the fol-

lowing procedures to change the control mode.

To shift from “Normal” mode to “Sport” mode

While the vehicle is stopped or being driven, push

the Twin Clutch SST control mode switch forward.

To shift from “Sport” mode to “S-Sport” mode

While the vehicle is stopped, push the Twin Clutch

SST control mode switch forward and hold it for 3

seconds or more.

CAUTION

For safety reasons, shift from the “Sport”

mode to the “S-Sport” mode only when

the vehicle is stopped.

Starting and driving

4-20

OCZE14E3

Содержание LANCER EVOLUTION











































































































































































































































































































































Результаты поиска

Содержание LANCER EVOLUTION

Отзывы:

Похожие инструкции для LANCER EVOLUTION

Бренды по названию

Популярные бренды

Mitsubishi MOTORS LANCER EVOLUTION, Руководство пользователя

Результаты поиска

Содержание LANCER EVOLUTION

Отзывы:

Похожие инструкции для LANCER EVOLUTION

Бренды по названию

Популярные бренды