Mitsubishi MOTORS LANCER EVOLUTION Скачать руководство пользователя страница 88

Страница: 88 / 330

WARNING

Do not allow any rear seat occupant to

hold onto the seatback of either front

seat, in order to reduce risk of injury

from a deploying side airbag. Special

care should be taken with children.

Do not place any objects near or in front

of the seatback of either front seat. They

could interfere with proper side airbag

inflation, and also could cause injury if

thrown free by side airbag deployment.

Do not place stickers, labels or additional

trim on the seatback of either front seat.

They could interfere with proper side air-

bag inflation.

Do not install seat covers on seats with

side airbags. Do not re-cover the seats

with side airbags. They could interfere

with proper side airbag inflation.

Do not attach a microphone (A) or any

other device or object around the part

where the curtain airbags (B) activate

such as on the windscreen, side door

glass, front and rear pillars and roof side

or assist grips. When the curtain airbags

inflate, the microphone or other device or

object will be hurled with great force or

the curtain airbags may not activate cor-

rectly, resulting in death or serious in-

jury.

WARNING

Do not put a hanger or any heavy or

pointed object on the coat hook.

If the curtain airbag was activated, any

such item could be propelled away with

great force and could prevent the curtain

airbag from inflating correctly. Hang

clothes directly on the coat hook (without

using a hanger).

Make sure there are no heavy or sharp

objects in the pockets of clothes that you

hang on the coat hook.

When loading luggage, do not stack lug-

gage near the side windows. They could

interfere with proper curtain airbag in-

flation.

WARNING

Do not allow the child to lean against or

close to the front door even if the child is

seated in a child restraint system.

The child’s head should also not be

leaned against or be close to the area

where the side airbag and curtain airbag

are located. It is dangerous if the side air-

bag and curtain airbag inflate.

Failure to follow all of these instructions

could lead to serious or fatal injury to the

child.

We recommend work around and on the

side airbags and curtain airbags system

to be done by a MITSUBISHI MOTORS

Authorized Service Point.

SRS warning lamp/display

E00407801474

Warning lamp

Warning display

If there is an error in the system, the warning lamp

will come on and the warning display will appear

on the information screen in the multi-information

display.

Seat and seat belts

2-28

OCZE14E3

Содержание LANCER EVOLUTION











































































































































































































































































































































Результаты поиска

Содержание LANCER EVOLUTION

Отзывы:

Похожие инструкции для LANCER EVOLUTION

Бренды по названию

Популярные бренды

Mitsubishi MOTORS LANCER EVOLUTION, Руководство пользователя

Результаты поиска

Содержание LANCER EVOLUTION

Отзывы:

Похожие инструкции для LANCER EVOLUTION

Бренды по названию

Популярные бренды