Mitsubishi MOTORS LANCER EVOLUTION Скачать руководство пользователя страница 241

Страница: 241 / 330

3. Connect the Dock connector (C) to the iPod

(B).

NOTE

Use a genuine Dock connector from Apple

Inc.

4. Connect the Dock connector (C) to the USB

input terminal (D).

CAUTION

Keep the lid of the glove box closed while

driving the vehicle. A lid or the contents

of the glove box could otherwise cause in-

juries.

NOTE

When closing the glove box, be careful not

to trap the connector cable.

5. To remove the Dock connector, turn the igni-

tion switch to the “LOCK” position first and

perform the installation steps in reverse.

Types of connectable devices and sup-

ported file specifications

E00762200015

Device types

E00762300289

Devices of the following types can be connected.

Model name

Condition

USB memory device

Storage capacity of 256

Mbytes or more

iPod touch

F/W Ver.1.1.1 or later

iPod classic

F/W Ver.1.0 or later

iPod (fifth generation)

F/W Ver.1.2.2 or later

iPod nano (fifth genera-

tion)

F/W Ver.1.2 or later

: “iPod touch,” “iPod classic,” “iPod” and “iPod

nano” are registered trademarks of Apple Inc. in

the United States and other countries.

Model name

Condition

iPod nano (second gen-

eration)

F/W Ver.1.1.2 or later

Models other than USB

memory devices and

iPods

Digital audio player

supporting mass storage

class

: “iPod touch,” “iPod classic,” “iPod” and “iPod

nano” are registered trademarks of Apple Inc. in

the United States and other countries.

NOTE

Depending on the type of the USB memory

device or other device connected, the con-

nected device may not function properly or

the available functions may be limited.

It is recommended to use an iPod with firm-

ware updated to the latest version.

You can charge your iPod by connecting it to

the USB input terminal when the ignition

switch is in the “ACC” or “ON” position.

Do not keep your USB memory device or

iPod in your vehicle.

It is recommended that you back up files in

case of data damage.

Do not connect to the USB input terminal

any device (hard disk, card reader, memory

reader, etc.) other than the connectable devi-

ces specified in the previous section. The de-

vice and/or data may be damaged. If any of

these devices was connected by mistake, re-

move it after turning the ignition switch to

the “LOCK” position.

For pleasant driving

5-57

OCZE14E3

Содержание LANCER EVOLUTION











































































































































































































































































































































Результаты поиска

Содержание LANCER EVOLUTION

Отзывы:

Похожие инструкции для LANCER EVOLUTION

Бренды по названию

Популярные бренды

Mitsubishi MOTORS LANCER EVOLUTION, Руководство пользователя

Результаты поиска

Содержание LANCER EVOLUTION

Отзывы:

Похожие инструкции для LANCER EVOLUTION

Бренды по названию

Популярные бренды