Mitsubishi MOTORS LANCER EVOLUTION Скачать руководство пользователя страница 59

Страница: 59 / 330

Press the switch down for opening the window,

and pull up the switch for closing.

Lock switch

E00303101120

1- Lock

2- Unlock

When this switch is operated, the passenger’s

switches cannot be used to open or close the door

windows and the driver’s switch cannot open or

close any windows other than the driver’s door

window.

To unlock, press it once again.

WARNING

A child may tamper with the switch at

the risk of its hands or head being trap-

ped in the window. When driving with a

child in the vehicle, please press the win-

dow lock switch to disable the passen-

ger’s switches.

Timer function

E00302400897

The door windows can be opened or closed for 30

seconds after the ignition switch is turned from the

“ON” position to the “ACC” or “LOCK” position.

However, once the driver’s door or the front pas-

senger’s door is opened, the windows cannot be

operated.

Safety mechanism (Driver’s door win-

dow only)

E00302500713

If a hand or head is trapped in the closing window,

it will lower automatically.

Nonetheless, make sure that nobody puts their head

or hand out of the window when closing the driv-

er’s door window.

The lowered window will become operational after

a few seconds.

WARNING

If the safety mechanism is activated three

or more times successively, the safety

mechanism will be temporarily cancelled.

If a hand or head got trapped, a serious

injury could result.

CAUTION

The safety mechanism is cancelled just

before the window is fully closed. This al-

lows the window to close completely.

Therefore be especially careful that no

fingers are trapped in the window.

The safety mechanism is deactivated

while the switch is pulled up. Therefore

be especially careful that fingers are not

trapped in the door window opening.

NOTE

The safety mechanism can be activated if the

driving conditions or other circumstances

cause the driver’s door window to be subjec-

ted to a physical shock similar to that caused

by a trapped hand or head.

Locking and unlocking

1-35

OCZE14E3

Содержание LANCER EVOLUTION











































































































































































































































































































































Результаты поиска

Содержание LANCER EVOLUTION

Отзывы:

Похожие инструкции для LANCER EVOLUTION

Бренды по названию

Популярные бренды

Mitsubishi MOTORS LANCER EVOLUTION, Руководство пользователя

Результаты поиска

Содержание LANCER EVOLUTION

Отзывы:

Похожие инструкции для LANCER EVOLUTION

Бренды по названию

Популярные бренды