Mitsubishi MOTORS LANCER EVOLUTION Скачать руководство пользователя страница 164

Страница: 164 / 330

For longer waiting periods with the engine running,

place the gearshift lever in the “N” (NEUTRAL)

position and apply the parking brake, while holding

the vehicle stationary with the service brake.

CAUTION

Do not keep the vehicle in a stopped posi-

tion on an uphill slope by depressing the

accelerator pedal instead of the brake

pedal.

The transmission may be damaged and

an accident may occur due to the follow-

ing conditions.

• The Twin Clutch SST fluid tempera-

ture will rise and can cause transmis-

sion damage.

CAUTION

• If the vehicle is kept in a stopped posi-

tion by depressing the accelerator

pedal instead of the brake pedal, the

vehicle will vibrate or “SLOW

DOWN” and the warning display

will appear on the information screen

in the multi-information display to

alert the driver that the Twin Clutch

SST fluid temperature has risen.

After that, if the Twin Clutch SST flu-

id temperature rises even higher, the

transmission protection control will

operate.

If this occurs, the vehicle may sudden-

ly reverse as if the gearshift lever was

in the “N” (NEUTRAL) position and

cause an accident.

If the warning display appears or

the transmission protection control

operates, refer to “When warning dis-

play is showing” on page 4-23.

Parking

E00622400014

To park the vehicle, first bring it to a complete

stop, fully engage the parking brake, and then

move the gearshift lever to the “P” (PARK) posi-

tion.

If you are going to leave the vehicle unattended, al-

ways switch off the engine and carry the key.

NOTE

On a slope, be sure to apply the parking

brake before moving the gearshift lever to

the “P” (PARK) position. If you move the

gearshift lever to the “P” (PARK) position

before applying the parking brake, it may be

difficult to disengage the gearshift lever from

the “P” (PARK) position when next you

drive the vehicle, requiring application of a

strong force to the gearshift lever to move

from the “P” (PARK) position.

What to do if the following occur with the Twin

Clutch SST

E00622500204

If there is a malfunction in the Twin Clutch SST or

engine electronic control module, the following

may occur.

Twin Clutch SST does not shift.

Vehicle cannot move.

Twin Clutch SST acceleration is slow.

Vehicle does not creep.

“Shift shock” is large.

Shifting occurs at higher engine speed.

Response is slow.

If any of these occurs, perform the following pro-

cedure.

When warning display is showing

The temperature of Twin Clutch SST fluid is high.

Refer to “Warning display” on page 4-23 and fol-

low the appropriate measures.

When the check engine warning lamp comes on

or blinking

There could be a malfunction in the engine elec-

tronic control module.

Starting and driving

4-26

OCZE14E3

Содержание LANCER EVOLUTION











































































































































































































































































































































Результаты поиска

Содержание LANCER EVOLUTION

Отзывы:

Похожие инструкции для LANCER EVOLUTION

Бренды по названию

Популярные бренды

Mitsubishi MOTORS LANCER EVOLUTION, Руководство пользователя

Результаты поиска

Содержание LANCER EVOLUTION

Отзывы:

Похожие инструкции для LANCER EVOLUTION

Бренды по названию

Популярные бренды