Mitsubishi MOTORS LANCER EVOLUTION Скачать руководство пользователя страница 194

Страница: 194 / 330

Important Points on Usage

E00735500023

iPod/iPhone Playback Function*

This product supports audio playback from

iPod/iPhone devices, however differing ver-

sions mean that playback cannot be guaran-

teed.

Please be aware that depending on the iPod/

iPhone model or version, operation may dif-

fer.

How to Clean

E00735700025

If the product becomes dirty, wipe with a

soft cloth.

If very dirty, use a soft cloth dipped in neu-

tral detergent diluted in water, and then

wrung out. Do not use benzene, thinners, or

other chemical wipes. This may harm the

surface.

Trademarks

E00735800026

Product names and other proper names are

the trademarks or registered trademarks of

their respective owners.

Furthermore, even if there is no specific de-

notation of trademarks or registered trade-

marks, these are to be observed in their en-

tirety.

“Made for iPod,” “Made for iPhone” mean

that an electronic accessory has been de-

signed to connect specifically to iPod or

iPhone, respectively, and has been certified

by the developer to meet Apple performance

standards.

iPhone, iPod, iPod classic, iPod nano, and

iPod touch are trademarks of Apple Inc., reg-

istered in the U.S. and other countries.

Apple is not responsible for the operation of

this device or its compliance with safety and

regulatory standards.

NOTE

iPod and iTunes licensing allows individual

users to privately reproduce and play back

non- copyrighted material as well as material

that may be legally copied and reproduced.

Infringement of copyright is prohibited.

Supported models for equipment by type

(vehicles with a Bluetooth

2.0 interface)

will vary. For details, see the Johnson Con-

trols, Inc. website.

For pleasant driving

5-10

OCZE14E3

Содержание LANCER EVOLUTION











































































































































































































































































































































Результаты поиска

Содержание LANCER EVOLUTION

Отзывы:

Похожие инструкции для LANCER EVOLUTION

Бренды по названию

Популярные бренды

Mitsubishi MOTORS LANCER EVOLUTION, Руководство пользователя

Результаты поиска

Содержание LANCER EVOLUTION

Отзывы:

Похожие инструкции для LANCER EVOLUTION

Бренды по названию

Популярные бренды