Mitsubishi MOTORS Lancer 2017, Руководство пользователя

Страница: 119 / 385

Steering wheel lock
5-54 Features and controls
5
position, and then turn the key to the
“LOCK” position and remove it.
N00512500195
[For vehicles equipped with the F.A.S.T.-key]
For information on operations for vehicles
equipped with the F.A.S.T.-key, refer to
“F.A.S.T.-key: Steering wheel lock” on page
5-20.
[Except for vehicles equipped with the
F.A.S.T.-key]
Remove the key at the “LOCK” position.
Turn the steering wheel until it is locked.
Turn the key to the “ACC” position while
moving the steering wheel slightly.
NOTE
 For vehicles with a CVT, the key cannot be
removed unless the selector lever is set to the
“P” (PARK) position, which allows the igni-
tion switch to turn to the “LOCK” position.
CAUTION
 Do not remove the ignition key from the
ignition switch while driving. The steering
wheel will lock, causing loss of control.
 If the engine is turned off while driving, the
power brake booster will stop functioning
and braking efficiency will be reduced. Also,
the power steering system will not function
and it will require greater effort to manually
steer the vehicle.
CVT
 Do not leave the key in the “ON” position for
a long time when the engine is not running.
This will cause the battery to run down.
 Do not turn the key to the “START” position
when the engine is running. It will damage
the starter motor.
Steering wheel lock
CAUTION To lock
To unlock
CAUTION
 Remove the key when leaving the vehicle.
NOTE
 If the front wheels are turned, the anti-theft
lock may sometimes make it difficult to turn
the key from “LOCK” position to “ACC”
position. Firmly turn the steering wheel to
the left or to the right as you turn the key.
BK0237700US.book 54 ページ ２０１６年４月１５日 金曜日 午前１１時２８分