manualshive.com logo in svg

Mitsubishi MOTORS Lancer 2017, Руководство пользователя

Новый Mitsubishi Lancer 2017 года - это стильный и надежный автомобиль с передовыми технологиями. Владельцы могут скачать бесплатное руководство по эксплуатации на manualshive.com, чтобы узнать больше о возможностях и функциях своего автомобиля. Никогда не потеряйте свой manual.

Поделиться
Скачать
background image

Supplemental Restraint System (SRS) - airbag

Seat and restraint systems

4-21

4

N00407701805

This vehicle is equipped with a Supplemental
Restraint System (SRS), which includes air-
bags for the driver and passengers.

The SRS front airbags are designed to supple-
ment the primary protection of the driver and
front passenger seat belt systems by provid-
ing those occupants with protection against
head and chest injuries in certain moderate to
severe frontal collisions. 
The SRS front airbags, together with sensors
at the front of the vehicle and sensors
attached to the front seats, form an advanced
airbag system.

The SRS driver’s knee airbag is designed to
supplement the primary protection of the
driver’s seat belt system. It can reduce the
forward movement of the driver’s lower legs

and provide increased overall body protection
in certain moderate to severe frontal colli-
sions.

The SRS side airbags (if so equipped) and the
curtain airbags (if so equipped) are also
designed to supplement the seat belts. The
SRS side airbags provide the driver and front
passenger with protection against chest inju-
ries by deploying the bag on the side
impacted in moderate to severe side impact
collisions. The SRS curtain airbags provide
the driver and passengers on the front seat
and rear outboard seat with protection against
head injuries by deploying a bag on the side
impacted in moderate to severe side impact
collisions.

The SRS airbags are NOT a substitute for use
of the seat belts. For maximum protection in
all types of accidents, seat belts must
ALWAYS be worn by everyone who drives or
rides in this vehicle (with infants and small
children in an appropriate child restraint sys-
tem in the rear seat, and older children buck-
led in the rear seat). Refer to “Child restraint
systems” on page 4-13. 

The seat belt webbing may be cleaned
with mild soap or detergent solution. Do
not use an organic solvent. Allow the belts
to dry in the shade. Do not allow them to
retract until completely dry. Do not
attempt to bleach or re-dye the belts. The
color may rub off and the webbing
strength may be affected.

Supplemental Restraint Sys-
tem (SRS) - airbag 

WARNING

WARNING

IT IS VERY IMPORTANT TO ALWAYS
WEAR YOUR SEAT BELT PROPERLY
EVEN WITH AN AIRBAG.

• Seat belts help keep the driver and pas-

sengers properly positioned. This
reduces the risk of injury in all collisions,
and reduces the risk of serious injuries or
death when the airbags inflate.
During sudden braking just before a col-
lision, an unrestrained or improperly
restrained driver or passengers can move
forward into direct contact with, or
within close proximity to, the airbag
when it begins to inflate.
The beginning stage of airbag inflation is
the most forceful and can cause serious
injuries or death if the occupant comes in
contact with the airbag at this time. 

• Seat belts reduce the risk of injury in

rollovers, rear impact collisions, and in
lower-speed frontal collisions, because
the airbags are not designed to inflate in
those situations.

• Seat belts reduce the risk of being

thrown from your vehicle in a collision or
rollover.

IT IS VERY IMPORTANT TO BE PROP-
ERLY SEATED.
• A driver or front passenger sitting too

close to the steering wheel or instrument
panel during airbag deployment can be
seriously injured or killed.

WARNING

BK0237700US.book  21 ページ  ２０１６年４月１５日　金曜日　午前１１時２８分

Содержание Lancer 2017


































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Lancer 2017

Valeo SC400 Operating Instructions Manual preview
SC400
Бренд: Valeo Страницы: 17
Toyota 2012 Rav4 Owner'S Manual preview
2012 Rav4
Бренд: Toyota Страницы: 529
Porsche 911 GT3R 2010 Technical Manual preview
911 GT3R 2010
Бренд: Porsche Страницы: 144
Kolpin 25-9250 Owner'S And Operator'S Manual preview
25-9250
Бренд: Kolpin Страницы: 25
AddSecure Asset Light Installation Manual preview
Asset Light
Бренд: AddSecure Страницы: 14
WABCO OnSide MM16167 Maintenance Manual preview
OnSide MM16167
Бренд: WABCO Страницы: 52
Radical Sportscars SR 3 SL Owner'S Handbook Manual preview
SR 3 SL
Бренд: Radical Sportscars Страницы: 44
Atera 080 705 User Information preview
080 705
Бренд: Atera Страницы: 3
Black Horse RB001BK Installation Instructions preview
RB001BK
Бренд: Black Horse Страницы: 5
Veldo Teknoloji DUCATO Manual preview
DUCATO
Бренд: Veldo Teknoloji Страницы: 32
OHIOSTEEL 1084TR Quick Start Manual preview
1084TR
Бренд: OHIOSTEEL Страницы: 2
Honda Fit LX 2015 Manual preview
Fit LX 2015
Бренд: Honda Страницы: 4
Pet Gear PG9300DR Instruction Manual preview
PG9300DR
Бренд: Pet Gear Страницы: 4
CITROEN 1953 Traction Avant User Manual preview
1953 Traction Avant
Бренд: CITROEN Страницы: 26
Dodge CHALLENGER HELLCAT 2017 Owner'S Manual preview
CHALLENGER HELLCAT 2017
Бренд: Dodge Страницы: 484
JBA 1528S Installation Instructions And Warranty Information preview
1528S
Бренд: JBA Страницы: 5
Mitsubishi 2015 OUTLANDER Owner'S Manual preview
2015 OUTLANDER
Бренд: Mitsubishi Страницы: 490
Ford transit connect 2012 User Manual preview
transit connect 2012
Бренд: Ford Страницы: 299

Бренды по названию

Популярные бренды

Загрузить еще бренды