Mitsubishi MOTORS Lancer 2017 Скачать руководство пользователя страница 282

Страница: 282 / 385

Listen to Audio Files on a USB Device

Comfort controls

7-35

Press the 2RDM key.

Play tracks in the category currently being
played in a random order.

Hold down the 2RDM key.

Play back the album in a random order
(tracks in any order on the album).

Search categories or track names, and select a
track.

1. Turn the

/SEL key to select the cate-

gory.

2. Press the

/SEL key. Categories or

tracks within the selected category are
displayed.

3. Turn the

/SEL key to select the cate-

gory or track.

4. Press the

/SEL key.

Repeat steps 1 to 4, and search for tracks.
Select the track, and press the

/SEL

key to play.

N00717400074

By connecting commercially-available USB
devices such as USB memory to this product,
you can play back audio files on these
through the product.

Shuffle Playback (RDM)

NOTE



Pressing again will cancel.

Album Shuffle Playback

NOTE



Pressing again will cancel.

Search Tracks

NOTE



While the category (1st level) is selected,
press the 6

key to cancel track search

mode.



If there is no operation for 10 seconds after
selecting the category, then track search
mode will be cancelled.



Select the category, and hold down the

/SEL key to start playback from the first

track in that category.



While the track is selected, press the 6
key to return to the previous operation.



While the track is selected, hold down the
6

key to cancel track search mode.



If there is no operation for five seconds after
selecting the track, that file is played back.



iPod operations such as selecting a track will
cancel track search mode.

Listen to Audio Files on a
USB Device

CAUTION



Do not leave the USB device unattended in
the vehicle.



Never hold these devices in your hand to
operate while driving, as this is dangerous.



Do not use hard discs, card readers, or mem-
ory readers, as damage may occur to these or
to the data contained therein. If these are
erroneously connected, then turn the ignition
switch to the “LOCK” position, then remove.



Because of the risk of data loss, it is recom-
mended that files be backed up.



No guarantee is made as regards damage to
the USB device, nor regarding loss or dam-
age to data contained therein.



Depending on how the devices are handled,
audio files being damaged or lost, therefore
it is recommended that data be backed up.

NOTE



Digital audio players that support the mass
storage class specifications can be con-
nected.

BK0237700US.book 35 ページ２０１６年４月１５日　金曜日　午前１１時２８分

Содержание Lancer 2017


































































































































































































































































































































































































Результаты поиска

Содержание Lancer 2017

Отзывы:

Похожие инструкции для Lancer 2017

Бренды по названию

Популярные бренды

Mitsubishi MOTORS Lancer 2017, Руководство пользователя

Результаты поиска

Содержание Lancer 2017

Отзывы:

Похожие инструкции для Lancer 2017

Бренды по названию

Популярные бренды