Mitsubishi MOTORS Lancer 2017, Руководство пользователя

Страница: 217 / 385

Bluetooth® 2.0 interface (if so equipped)
5-152 Features and controls
5
6. The voice guide will say “Calling <name>
<location>” and then the system will dial
the telephone number.
You can redial the last number called, based
on the history of dialed calls in the paired cel-
lular phone.
Use the following procedure to redial.
1. Press the SPEECH button.
2. Say “Redial.”
N00565700018
During a call, press the SPEECH button to
enter voice recognition mode, then say
“<numbers> SEND” to generate DTMF
tones.
For example, if during a call you need to sim-
ulate the pressing of a phone button as a
response to an automated system, press the
SPEECH button and speak “1 2 3 4 pound
send” and the 1234# will be sent via your cel-
lular phone.
N00565800019
If an incoming phone call is received while
the ignition switch is in the “ACC” or “ON”
position, the audio system will be automati-
cally turned on and switched to the incoming
call, even when the audio system was origi-
nally off.
The voice guide announcement for the
incoming call will be output from the front
passenger’s seat speaker.
If the CD player or radio was playing when
the incoming call was received, the audio sys-
tem will mute the sound from the CD player
or radio and output only the incoming call.
To receive the call, press the PICK-UP button
on the steering wheel control switch.
When the call is over, the audio system will
return to its previous state.
N00565900010
At any time during a call, you can mute the
vehicle microphone.
Pressing the SPEECH button and then saying
“Mute” during a call will turn ON the mute
function and mute the microphone.
Saying “Mute off” in the same way will turn
off the mute function and cancel the mute on
the microphone.
NOTE
 If the name you selected has matching data
in the vehicle phonebook but no telephone
number is registered under the selected loca-
tion, the voice guide will say
“{home/work/mobile/other} not found for
<name>. Would you like to add location or
try again?”
Say “Try again,” and the system will return
to Step 3.
Say “Add location” and you can register an
additional telephone number under the
selected location.
 If the name you selected has matching data
in the mobile phonebook but no telephone
number is registered under the selected loca-
tion, the voice guide will say
“{home/work/mobile/other} not found for
<name>. Would you like to try again?”
Answer “Yes,” and the system will return to
Step 3.
Answer “No,” and the call making will be
cancelled. Start over again from Step 1.
NOTE
 When the confirmation function is on, the
system will check if the name and location of
the receiver are correct. If the name is cor-
rect, answer “Yes.”
To change the name or location to call,
answer “No.” The system will return to Step
3.
Redialing
Send function
Receiving calls
Mute function
BK0237700US.book 152 ページ ２０１６年４月１５日 金曜日 午前１１時２８分