Mitsubishi MOTORS Lancer 2017, Руководство пользователя

Страница: 135 / 385

All-wheel driving operation
5-70 Features and controls
5
N00530600169
Full-time 4WD vehicles are propelled by
engine power distributed constantly and
appropriately to all 4 wheels.
Not only does this ensure enhanced handling
on dry, paved roads but also permits better
traction when driving on slippery, wet or
snow-covered roads and when moving out of
mud.
These vehicles, however, are not designed
for off-road use, and are unsuitable for
driving on bumpy ground that may cause
excessive strain.
Full-time 4WD vehicles
should be driven only under the same condi-
tions as are suitable for ordinary front-wheel
drive vehicles.
Electronically controlled 4WD system vehi-
cles are propelled by engine power distrib-
uted constantly and appropriately to all 4
wheels.
Not only does this ensure enhanced handling
on dry, paved roads but also permits better
traction when driving on slippery, wet or
snow-covered roads and when moving out of
mud.
These vehicles, however, are not designed
for off-road use, and are unsuitable for
driving on bumpy ground that may cause
excessive strain.
Electronically controlled
4WD system vehicles should be driven only
under the same conditions as are suitable for
ordinary front-wheel drive vehicles.
When turning a sharp corner in “4WD
LOCK” position at low speed, a slight differ-
ence in steering may be experienced similar
to feeling as if the brakes were applied. This
is called tight corner braking and results from
each of the four tires being at a different dis-
tance from the corner. The phenomenon is
typical of 4-wheel drive vehicles. If this
occurs, either straighten out the steering
wheel, or change to “2WD” or “4WD
AUTO” mode.
Set the drive mode-selector to “4WD AUTO”
or “4WD LOCK” in accordance with the road
conditions, and then gradually depress the
accelerator pedal for a smooth start.
CAUTION
 The warning display on the information
screen in the multi-information display, a
problem has occurred with the electronically
controlled 4WD system and the safety device
has activated. Have an inspection made by
an authorized Mitsubishi Motors dealer or a
repair facility of your choice as soon as pos-
sible.
Type 1 Type 2
CAUTION
 Always use tires of the same size, type, and
brand that have no wear differences. Using
tires that differ in size, type, brand, or wear
amount may activate the protection of the
drive-system components, causing the drive
mode in “4WD AUTO” mode to lock or the
“4WD” and “LOCK” indicators to blink
alternately.
All-wheel driving operation
For vehicles with full-time 4WD
For vehicles with electronically
controlled 4WD system
Turning sharp corners
On snowy or icy roads
BK0237700US.book 70 ページ ２０１６年４月１５日 金曜日 午前１１時２８分