Mitsubishi MOTORS Colt 2009, Руководство пользователя

Страница: 326 / 449

For emergencies
6-27
6
How to change a tyre
E00801202086
Before changing a tyre, first stop your vehicle in a safe, flat
location.
1. Park the vehicle on level and stable ground.
2. Set the parking brake firmly.
3. On vehicles with manual transmission, turn the ignition
key to the “LOCK” position, move the gearshift lever to
the “R” (Reverse) position.
On vehicles with automated manual transmission, move
the allshift lever to the “R” (Reverse) position, turn the
ignition key to the “LOCK” position.
With an automated manual transmission vehicle, confirm
that there is a “R” in the allshift indicator display.
4. Turn on the hazard flashers and set up a warning triangle,
flashing signal lamp, etc., at an adequate distance from the
vehicle, and have all your passengers leave the vehicle.
5. To prevent the vehicle from rolling when it is raised on the
jack, place chocks or blocks (A) at the tyre that is diago-
nally opposite from the tyre (B) you are changing.
NOTE
●
The chocks shown in the illustration do not come with
your vehicle. It is recommended that you keep ones in the
vehicle for use if needed.
● If chocks are not available, use stones or any other objects
that are large enough to hold the wheel in position.
WARNING
!
●
Be sure to apply chocks or blocks to the correct tyre
when jacking up the vehicle. If the vehicle moves
while jacked up, the jack could slip out of position,
leading to an accident.