Mitsubishi MOTORS Colt 2009 Скачать руководство пользователя страница 182

Страница: 182 / 449

Starting and driving

4-21

CAUTION

●

Observe the following precautions when the engine

is stopped automatically. Otherwise, an unexpected
accident might occur when the engine restarts auto-

matically.

• Do not depress the accelerator pedal to race the

engine while the vehicle is stopped (regardless of

whether the engine is running or stopped).

Otherwise, an unexpected accident might occur
when the engine restarts automatically.

• Do not leave the driver’s seat or open the bonnet.

If the driver’s seat belt is unfastened or if the bon-
net is opened, the “

” indicator lamp will blink to

inform the driver. If this occurs, the engine will not

restart automatically even if the clutch pedal is
depressed, the seat belt is refastened, and the bon-

net is closed. While depressing the brake pedal,

fully depress the clutch pedal and turn the ignition
switch to the “START” position to start the engine.

For details, refer to “Starting the engine” on page

4-17.

CAUTION

• Do not move the gearshift lever to a position other

than the “N” (Neutral) position.
If the gearshift lever is moved to a position other
than the “N” (Neutral) position, the “

” indicator

lamp blinks and the buzzer sounds.
If the gearshift lever is returned to the “N” (Neu-

tral) position, the lamp stops blinking and the

buzzer stops sounding. The engine will not restart
if the gearshift lever is in a position other than the

“N” (Neutral) position.

Содержание Colt 2009


































































































































































































































































































































































































































































Результаты поиска

Содержание Colt 2009

Отзывы:

Похожие инструкции для Colt 2009

Бренды по названию

Популярные бренды

Mitsubishi MOTORS Colt 2009, Руководство пользователя

Результаты поиска

Содержание Colt 2009

Отзывы:

Похожие инструкции для Colt 2009

Бренды по названию

Популярные бренды