Mitsubishi MOTORS Colt 2009 Скачать руководство пользователя страница 247

Страница: 247 / 449

5-24

For pleasant driving

To adjust the volume

E00708700463

VOL (Volume control)

Turn the VOL knob (2) clockwise to increase the volume;

anticlockwise to decrease the volume. The status will be dis-
played in the display (5).

To adjust the tone

E00708800914

Press the AUDIO button (4) to select SCV

→

BASS

→

TRE

→

FADE

→

BAL

→

Audio adjust mode off. The status will be

displayed in the display (5).

SCV (Speed Compensated Volume)

SCV function is a feature that automatically adjusts the VOL-

UME, BASS, and TREBLE settings in accordance with the
vehicle speed. Press the audio adjust button (6) either

to select OFF or the desired settings 1-6.

BASS (Bass tone control)

Press the audio adjust button (6) either

to select the

desired bass tone quality.

TRE (Treble tone control)

Press the audio adjust button (6) either

to select the

desired treble tone quality.

FADE (Front/Rear balance control)

Press the audio adjust button (6) either

to balance

the volume of sound from the front and the rear speakers.

BAL (Left/Right balance control)

Press the audio adjust button (6) either

to balance

the volume of sound from the left and the right speakers.

NOTE

●

Audio adjust mode will be canceled when radio or CD

operation is performed or no adjustment is performed for

more than 7 seconds or press the AUDIO button (4) for 2
seconds or longer.

Содержание Colt 2009


































































































































































































































































































































































































































































Результаты поиска

Содержание Colt 2009

Отзывы:

Mitsubishi MOTORS Colt 2009, Руководство пользователя, Страница: 247 / 449

Результаты поиска

Содержание Colt 2009

Отзывы: